User manual FUNAI L13TRG

[. . . ] A purchase receipt or other proof of original retail purchase will be required together with the product to obtain service under this warranty. This warranty shall not be extended to any other person or transferee. This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was attempted by an unauthorized service center. This SYLVANIA Limited warranty does not apply to any the product not purchased and used in the United States. [. . . ] The shut off time can be determined by the number of times you press the button. (0, 10, 20, 30, . . 90, 0 minutes) 15 14. GAME button- Press to set the Game mode and external input mode at the same time. Press the GAME button again to exit the mode. IN jack- Connect to an antenna, cable system, or satellite system. 16. AC cord- Connect to a standard AC outlet (120V/60Hz). NOTE: Remove the AC cord from the hook to avoid breaking a wire before you connect to a standard AC outlet. - REMOTE CONTROL - POWER GAME SLEEP DISPLAY 7 1 2 5 8 0 3 6 9 +100 CHANNEL RETURN 14 13 12 11 9 4 7 6 5 MENU VOL CH VOL CH MUTE 10 4 1. VIDEO (in) jack- Connect to the video output jack of a video camera or VCR. AUDIO (in) jack- Connect to the audio output jack of a video camera or VCR. EARPHONE jack- To connect earphone (not supplied) for personal listening. MENU button- Press to display the menu on the TV screen. VOLUME / buttons- Press to control the volume level. The TV may recognize TV channels to be CATV channels by the receiving conditions. In this case, try AUTO MEMO action again in the fine receiving conditions. [ADD/DELETE FUNCTION] 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH(annel) or button to point to "CHANNEL SET". 3) Press the VOL(ume) button so that "ADD/DELETE" is selected. 4) Use the CH(annel) or button to select the channel you wish to put into memory or to erase from memory. Note: The display will return to the screen in about 10 seconds. Perform "ADD/DELETE" function while this display appears on the screen. Press the VOL(ume) or button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory. Press the VOL(ume) or button to light up the channel number in LIGHT RED if you wish to erase the channel from memory. 5) Press the MENU button to exit the menu. ADD/DELETE AUTO MEMO PICTURE CHANNEL SET [ENGLISH]ESPAÑOL V-CHIP SET UP CAPTION [OFF] PICTURE CHANNEL SET [ENGLISH]ESPAÑOL V-CHIP SET UP CAPTION [OFF] CHANNEL PRESETTING NOTE:You MUST PRESET channels BEFORE using CHANNEL or button. [. . . ] 5 Press the MENU button to exit the menu. TV-PG D L S V [BLOCK] [BLOCK] [BLOCK] [BLOCK] [BLOCK] TV-Y [VIEW] ) [VIEW] TV-Y7 ( [BLOCK] TV-G TV-PG (DLSV) [BLOCK] TV-14 (DLSV) [BLOCK] TV-MA ( LSV) [BLOCK] TROUBLESHOOTING GUIDE Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save your time and money. Poor Reception on Some Channels Remote Control Doesn't Work MAINTENANCE CABINET CLEANING Wipe the front panel and other exterior surLines or Streaks in Picture SUPPLIED ACCESSORIES Remote control unit (N0132UD) Batteries ("AA" x 2) Rod Antenna [13" model only] (0EMN00673 or 0EMN01599) Owner's Manual Sound OK, Picture Poor Picture OK, Sound Poor Picture Rolls Vertically Ghosts in picture Picture Distorted QUICK SERVICE CHECK LIST No Picture or Sound Bars On Screen Picture Blurred Weak Picture No Color faces of the TV with a soft cloth immersed in lukewarm water and wrung dry. Do not spray insecticide liquid near the TV. [. . . ]