User manual FUNAI LV448HG

[. . . ] will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase. LV448HG (15 INCH Photo Stand Type) LIMITS AND EXCLUSIONS : THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY. This warranty shall not be extended to any other person or transferee. This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was attempted by AUTHORIZED SERVICE FACILITY. [. . . ] 3) Replace the cover. CH RETURN MUTE POWER SLEEP +100 3 6 9 INPUT SELECT DISPLAY SLEEP 10 9 AV-IN2 R AUDIO L COMPONENT Y 6 4 7 Pb Pr 12 13 AUDIO AV-IN1 1 7 2 MENU MUTE VOL 8 3 R L VIDEO 14 S-VIDEO 15 ANT 16 HEAD PHONE [BATTERY PRECAUTIONS] · Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device. · Do not mix different types of batteries together (e. g. Alkaline and Carbon-Zinc) or old batteries with fresh ones. · If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. · Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. 1. MENU button- Press to display the menu on the TV screen. VOLUME (VOL) n/m buttons- Press to control the volume level. Press the VOL m button to determine the setting mode from the menu on the TV screen. Press to select or adjust from a particular menu. (for example: Language Selection, Channel Presetting, Closed Caption Selection, Picture Adjustment or V-CHIP Set Up) 3. 4) Use the CH(annel) or button to select the channel you wish to put into memory or to erase from memory. Perform "ADD/DELETE CH" function while this display appears on the screen. Press the VOL(ume) m button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory. Press the VOL(ume) m button to light up the channel number in LIGHT RED if you wish to erase the channel from memory. 5) Press the MENU button to exit the menu. - TV SET UP PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT] - CHANNEL SET UP ADD/DELETE CH (TV) AUTO PRESET CH CHANNEL PRESETTING To preset a channel or to change a preset channel, follow the procedure below. 1) Press the POWER button to turn on the TV. 2) Press the MENU button so that the menu display appears on the TV - TV SET UP screen. PICTURE CHANNEL SET UP V-CHIP SET UP 3) Press the CH(annel) or button to point to "CHANNEL SET UP". LANGUAGE [ENGLISH] CAPTION [OFF] Then press the VOL(ume) m button. TV SOUND [MAIN] BACK LIGHT [BRIGHT] 4) Press the CH(annel) or button to point to "AUTO PRESET CH". - CHANNEL SET UP The tuner scans and memorizes all active channels in your area. [. . . ] Before cleaning the picture screen, disconnect the power cord. Remote Control Doesn't Work Lines or Streaks in Picture Sound OK, Picture Poor Picture OK, Sound Poor Picture Rolls Vertically Ghosts in picture Picture Distorted QUICK SERVICE CHECK LIST No Picture or Sound Bars On Screen Picture Blurred Weak Picture Wipe the front panel and other exterior surfaces of the TV with a soft cloth immersed in lukewarm water and wrung dry. Do not spray insecticide liquid near the TV. Such chemicals may cause damage and discoloration to the exposed surfaces. PROBLEM No Color POSSIBLE REMEDY Try a new channel, if OK, then possible station trouble. Is antenna connected to terminal on the back of the set? [. . . ]