User manual FUNAI SE447SG

[. . . ] Read Instructions- All the safety and operating instructions should be read before the appliance is operated. Retain Instructions- The safety and operating instructions should be retained for future reference. Heed Warnings- All warnings on the appliance and in the operating instructions should be adhered to. Follow Instructions- All operating and use instructions should be followed. [. . . ] Press [PLAY] or [STOP] Set the AM CLOCK SET repeatedly. or PM MONTH DAY YEAR 03 / 17 MON 2003 HOUR MINUTE AM/PM 05 : 40 PM AM PM Set the month 1 2 3 Search Functions 4 Picture Search If you want to skip or repeat a scene during playback, press · To go back one step, press [REW]. Start the clock by pressing [C. RESET/EXIT] or [F. FWD]. · Press it again and the VCR will now search in super high speed. (in the LP/SLP modes only) ­4­ EN Index Search An index mark will be assigned at the beginning of each recordings you make. You may skip to a specific marked point by following the steps below. Press [SEARCH-MODE] so that the Index Search menu appears. Enter the number of recordings you wish to skip by pressing [PLAY] or [STOP] within 30 seconds. INDEX SEARCH 03 1 2 3 1 OTR (One Touch Recording) This feature allows you to set the recording length simply by pressing [REC/OTR] on the VCR. Begin OTR by pressing [REC/OTR] on the VCR repeatedly until the desired recording length appears. REC (Normal recording) OTR(8:00) OTR(0:30) OTR(1:00). . . . . OTR(7:30) Press [F. FWD] or [REW] to start index search. If you want to go in the forward direction, press [F. FWD]. · TV STEREO or SAP is selected. Tape Speed Type of tape SP mode SLP mode T60 1hour 3hour Recording/Playback Time T120 2hours 6hour T160 2-2/3hours 8hour For once: Press [PLAY] or [STOP] to point to "ONCE". For daily (Monday~Friday): Press [PLAY] or PROGRAM NUMBER 4 [STOP] to point to "DAILY". ONCE For weekly: Press [PLAY] or [STOP] to point to DAILY WEEKLY "WEEKLY". Then, press [F. FWD]. Set the date First, press [PLAY] or [STOP] for the month. Next, press [PLAY] or [STOP] for the day. Then, press [F. FWD]. Set the start time First, press [PLAY] or [STOP] for the hour. Next, press [PLAY] or [STOP] for the minute. And then, press [PLAY] or [STOP] for AM or PM. Then, press [F. FWD]. Set the end time Follow the instructions of "Set the start time" to set the end time. Set the channel number Press [PLAY] or [STOP] repeatedly for the desired channel number. If you connected the VCR to a cable box or satellite box as in "Connect VCR to TV" on page 3, select the VCR to channel 3 or 4 the same channel as RF output channel of the VCR. Then, select the channel you want to record at the cable box or satellite box. [. . . ] Seleccione "ENGLISH" , "FRANCAIS"(French) o "ESPAÑOL" (Spanish) pulsando [PLAY] o [STOP]. El sintonizador explora y memoriza todos los canales activos de su zona. Tras la exploración, el sintonizador se detiene en el canal memorizado más bajo. PREPARACIÓN DEL RELOJ 1. Pulse [MENU] hasta que aparezca el menú principal. [. . . ]