User manual FUNAI SP1810

[. . . ] PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized electronic tuning system provides free and easy channel selection, and lets you tune directly to any channel using the channel number buttons (0~9 and +100-key) on the remote control. Full-Function Remote Control Sleep Timer Closed Caption Decoder- You may view specially labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program. Auto Shut Off Function- If there is no air signal input from the antenna terminal and no user operation for 15 minutes, the TV will turn itself off automatically. [. . . ] (for example: Language Selection, Channel Presetting, Closed Caption Selection, Picture Adjustment, V-CHIP Set Up) 7. CHANNEL L/M buttons- Press to select memorized channel. NOTE:You MUST PRESET channels BEFORE using CHANNEL L/M buttons. (See CHANNEL PRESETTING) Press to select the setting mode from the menu on the TV screen. Press to select item you want to adjust in the picture control mode. POWER button- Press to turn the TV ON and OFF. 9. Infrared Sensor Window- Receives the infrared control signals from the remote control unit. 10. MUTE button- Press the MUTE button to turn off the sound portion of the TV program. (Volume level display turns LIGHT RED from LIGHT BLUE. ) Press the MUTE button again or press the VOL(ume) L or M button to restore sound. 11. CHANNEL RETURN button- Press this button to go back to the previously viewed channel. For example, pressing the CHANNEL RETURN button once will change channel display from CH 3 (present channel) to CH 10 (previously viewed channel), and pressing it a second time will return from CH 10 to CH 3. To preset a channel or to change a preset channel, follow the procedure below. 1) Press the POWER button to turn on the TV. PICTURE 2) Press the MENU button so that the menu display appears CHANNEL SET on the TV screen. [ENGLISH]ESPAÑOL V-CHIP SET UP 3) Press the CH(annel) L or M button to point to "CHANNEL SET". CAPTION [OFF] Then, press the VOL(ume) L button. 4) Press the CH(annel) L or M button to point to "AUTO MEMO". ADD/DELETE AUTO MEMO The tuner scans and memorizes all active channels in your area. STEREO [ON] G The TV distinguishes between standard TV channels and cable (CATV) channels. G When AUTO MEMO action is completed, the lowest memorized channel reappears on the screen. G When you press the CH(annel) L or M button after selecting AUTO MEMO, the tuner will stop at the memorized channels only. G The TV may memorize TV channels as CATV channels if the reception conditions are poor. [. . . ] When you turn "TV-MA" to [VIEW], then all ratings will turn to [VIEW] automatically Note: When you select [TV-MA], "D" does not appear on the TV screen. G The sub-ratings which set to [BLOCK] appear next to the rating category in the TV RATING menu. 5) Press the MENU button to exit the menu. TV-Y [VIEW] ) [VIEW] TV-Y7 ( TV-G [BLOCK] TV-PG (DLSV) [BLOCK] TV-14 (DLSV) [BLOCK] TV-MA ( LSV) [BLOCK] 5) Press the MENU button to exit the menu. TROUBLESHOOTING GUIDE Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save you time and money. Poor Reception on Some Channels Different color marks on screen Remote Control Doesn't Work MAINTENANCE CABINET CLEANING G PICTURE TUBE CLEANING Wipe the picture tube of the TV with a soft cloth. Before cleaning the picture tube, disconnect the power cord. Lines or Streaks in Picture Sound OK, Picture Poor Picture OK, Sound Poor Picture Rolls Vertically G Ghosts in picture Picture Distorted QUICK SERVICE CHECK LIST No Picture or Sound Bars On Screen Picture Blurred Weak Picture No Color Wipe the front panel and other exterior surfaces of the TV with a soft cloth immersed in lukewarm water and wrung dry. [. . . ]