User manual FUNAI SRC19ACV

[. . . ] THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The caution marking is located on the rear of the cabinet. IMPORTANT SAFEGUARDS 1. Read instructions-All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions-The safety and operating instructions should be retained for future reference. 3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. [. . . ] NOTE: Every time an index signal is skipped, the number in the program indicator decreases by one. End of tape Pro. 6 Pro. 7 4 After Index Search 4 3 2 1 1 2 3 INDEX MARK When the preset program is reached, the TV/DVD/VCR will start playback automatically. · A video cassette must be inserted in the TV/DVD/VCR for this function to work. · The number of Index Searches can be set up to 20. · This function will not operate in the recording mode. · When you want to cancel the Index Search while in progress, press the STOP button. SPECIAL FEATURES REAL TIME TAPE COUNTER TV/VCR This shows the elapsed recording or playback time in hours, minutes, and seconds. (The displayed time will not change on a blank tape or blank portions on the tape. )The "­" indication will appear when the tape has rewound further than "0:00:00" on the tape counter. AUTO REWIND-EJECT TV/VCR · When the end of a tape is reached during recording, playback, or fast-forward, the tape will automatically rewind to the beginning. After rewinding finishes, the TV/DVD/VCR will eject the tape and turn itself to off. This function is operative when Repeat Play is set to the [OFF] position. The tape will not auto-rewind during timer recording or One Touch Recording. · · - 29 - EN 1C29 RECORDING Make sure . . . · TV/DVD/VCR power must be turned on. · Insert a cassette tape with its erase prevention tab in place. It is set up to 8 hours. SP 1)Insert a pre-recorded video cassette into the Source (Playing) VCR or camcorder. 2)Insert a blank video cassette, or one you want to record over, into the TV/DVD/VCR's cassette compartment. 3)Press the SPEED button on remote control for the TV/DVD/VCR to select the desired recording speed (SP/SLP). 4)Press the CHANNEL button K or L on the TV/DVD/VCR until "AUX" appears on the screen. 5)Press the RECORD button on the TV/DVD/VCR. 6)Begin playback of the tape in the source (Playing) VCR or camcorder. NOTE: For best results during copying, use the TV/DVD/VCR's front panel controls whenever possible. The remote control might affect the source (Playing) VCR's playback operation. - 31 EN 1C29 TIMER AUTOMATIC TIMER RECORDING TV/VCR You may set the TV/DVD/VCR to start and end a recording while you are away. You can set 8 programs to record on specific days, daily or weekly within a 1 year period. In the example below, the timer is being set to record: DATE: July 4th, 2003 SETTING TIME: from 7:30PM to 8:50PM CHANNEL: CH61 TAPE SPEED: SP Make sure . . . [. . . ] El sintonizador explora y memoriza todos los canales activos de su zona. NOTAS: · El televisor/DVD/videograbadora distingue entre los canales de TV estándar y los canales de televisión por cable. · Si desea reproducir o grabar una cinta de vídeo ANTES de preajustar el sintonizador, deberá presionar el botón SETUP del mando a distancia. · El televisor/DVD/videograbadora puede memorizar canales de TV como canales de CATV si las condiciones de recepción no son buenas. [. . . ]