User manual FUNAI SRC2213B

[. . . ] OWNER'S MANUAL COLOR TV/VCR SRC2213B SRC2319 13" MODEL ILLUSTRATED This Owner's Manual is made of recycled paper. As an ENERGY STAR ® Partner, our company has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. registered mark. INSTRUCCIONES EN ESPAÑOL INCLUIDAS. If you need additional assistance for set-up or operating after reading owner's manual, please call TOLL FREE : 1-800-968-3429. Please read before using this equipment WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Selection G PG PG-13 R NC-17 X Rating Category Explanations General Audience Parental Guidance suggested. Unsuitable for children under 13 Restricted; under 17 requires accompanying parent or adult guardian No one under 17 admitted Mature audience only · When you select the rating category and turn it · 5 Exit the V-Chip setting mode Press the MENU button on the remote control to enter the setting and exit the screen. [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically. When you turn "G" to [VIEW], then all ratings will turn to [VIEW] automatically. Exit the V-Chip setting mode CHANGING V-CHIP BLOCKED PROGRAMMING 5 Note: To change the rating, the TV must be turned to - 16 - Press the MENU button on the remote control to enter the setting and exit the screen. EN 1K09 CHANGE ACCESS CODE To change access code, follow the steps. 4 Enter New code NEW CODE 1 Select "V-CHIP SET UP" Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to select "VCHIP SET UP". Then, press the F. FWD/B button. 2 Enter Access code Use the number buttons to enter your desired access code in the NEW CODE space. Then enter the same code in the CONFIRM CODE space. V-CHIP SET UP screen appear on the screen. · If you enter wrong code, repeat step 4, making sure you enter the same new code exactly in the confirm code space. XXXX CONFIRM CODE ____ ACCESS CODE Use the number on the remote control to enter the access code. The default code is 0000. ____ 5 Exit the V-Chip setting mode 3 Select "CHANGE CODE" ­ V-CHIP SET UP ­ TV RATING MPAA RATING B CHANGE CODE Press the PLAY/K or STOP/L button to select "CHANGE CODE". Then, press the F. FWD/B button. Press the MENU button on the remote control to exit the screen. Note: If you unplug the power code or power failure occurs, the changed access code will be lost and will return to default (0000). Change your access code again as necessary. PLAYBACK This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. PRECAUTIONS INSERTING A CASSETTE · Avoid moisture. Moisture condensation may occur · · · on the tape if it is moved from a cold place to a warm place or visa versa. Before using a tape with these conditions, to avoid damage of the tape and your TV/VCR, wait until the tape has warmed to room temperature and the moisture has evaporated. Avoid extreme heat, high humidity and magnetic fields. Do not tamper with the cassette mechanism. Do not touch the tape with your fingers. Insert the cassette in the direction as shown. [. . . ] (Ejemplo: 6 - 06) Luego, pulse el botón F. FWD/B. 5) Pulse el botón PLAY/K o STOP/L hasta que aparezca el año deseado. (Ejemplo: 2003) Luego, pulse el botón F. FWD/B. 6) Pulse el botón PLAY/K o STOP/L hasta que aparezca la hora deseada. [. . . ]