User manual FUNAI SRC2213X

[. . . ] OWNER'S MANUAL COLOR TV/VCR SRC2213X This Owner's Manual is made of recycled paper. As an ENERGY STAR ® Partner, our company has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. registered mark. INSTRUCCIONES EN ESPAÑOL INCLUIDAS. If you need additional assistance for set-up or operating after reading owner's manual, please call TOLL FREE : 1-800-968-3429 Please read before using this equipment WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The caution marking is located on the rear of the cabinet. IMPORTANT SAFEGUARDS 1. Read instructions-All the safety and operating instructions should be read before the appliance is operated. [. . . ] When you turn "G" to [VIEW], then all ratings will turn to [VIEW] automatically. EN 9I03 - 16 - 5 Exit the V-Chip setting mode 5 Exit the V-Chip setting mode Press the MENU button on the remote control to enter the setting and exit the screen. CHANGE ACCESS CODE To change access code, follow the steps. Press the MENU button on the remote control to exit the screen. Note: If you unplug the power code or power failure occurs, the changed access code will be lost and will return to default (0000). Change your access code again as necessary. 1 Select "V-CHIP SET UP" FM MODE This function enables you to receive FM radio broadcasting. Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to select "VCHIP SET UP". Then, press the F. FWD/B button. 1 Set the FM mode FM 88. 0 MHz 2 Enter Access code ACCESS CODE Use the number on the remote control to enter the access code. The default code is 0000. Press the TV/FM button on the remote control. The radio frequency appears on the TV screen. ____ 2 ­ V-CHIP SET UP ­ TV RATING MPAA RATING B CHANGE CODE Select the radio frequency you want to receive 3 Select "CHANGE CODE" Press the CHANNEL K or L button until your desired radio frequency appears. NOTES: · The radio frequency indication repeats to appear and disappear. · You can not record the FM radio wave broadcasting. · If you receive a weak radio signal, you may change the FM Antenna mode to INT(internal) or EXT(external) by following the step below. Press the PLAY/K or STOP/L button to point to "CHANNEL SET UP". 2)Press the PLAY/K or STOP/L button to point to "FM ANTENNA". Select [INT] or [EXT] using the F. FWD/B or REW/s button. Press the PLAY/K or STOP/L button to select "CHANGE CODE". Then, press the F. FWD/B button. 4 Enter New code NEW CODE Use the number buttons to enter your desired access code in the NEW CODE space. Then enter the same code in the CONFIRM CODE space. V-CHIP SET UP screen appear on the screen. · If you enter wrong code, repeat step 4, making sure you enter the same new code exactly in the confirm code space. XXXX CONFIRM CODE ____ PLAYBACK This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. INSERTING A CASSETTE PRECAUTIONS Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the TV/VCR. [. . . ] En el ejemplo de abajo, el reloj va a ajustarse así: FECHA: 6 de mayo de 2003 HORA: 5:40 PM 1) Pulse el botón MENU en el mando a distancia. Pulse el botón PLAY/K o STOP/L para indicar "AJUSTE RELOJ". 2) Pulse el botón PLAY/K o STOP/L para indicar "AJUSTE MANUAL RELOJ". 3) Pulse el botón PLAY/K o STOP/L hasta que aparezca el mes deseado. [. . . ]