User manual FUNAI SRD2900

[. . . ] OWNER'S MANUAL DVD PLAYER with VIDEO CASSETTE RECORDER SRD2900 INSTRUCCIONES EN ESPAÑOL INCLUIDAS. If you need additional assistance for set-up or operating after reading owner's manual, please call TOLL FREE : 1- 800 - 968-3429 Please read before using this equipment. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. LASER SAFETY This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. [. . . ] Press the VCR button to choose VCR or DVD mode, then continue with the other features as described in this manual. ¡When timer recordings are set, the TIMER SET light will come on. To use the VCR as usual until the time for the recording, press the TIMER SET button so that the TIMER SET light disappears. Press the VCR/TV button to choose the VCR position. Press the VCR button to choose VCR or DVD modes, then continue with the other features as described in this manual. Press the PLAY button or the STOP button repeatedly for the desired channel number. Then, press the F. FWD button. ONE TIME PROGRAM PROGRAM NUMBER 4 DATE 05 /13 MON START TIME 07: 30 PM END TIME 08: 30 PM CHANNEL -REC SPEED - - If you want to use the DVD player during a VCR timer recording or while the TIMER SET light is on or flashes. ¡You can use the DVD player while the TIMER SET light If you connected the DVD/VCR to a cable box or satellite box as in "DVD/VCR TO TV CONNECTION" on page 14, set the DVD/VCR to channel 3 or 4 i. e. the same channel as the CH3 or CH4 switch on the back of the DVD/VCR. Then, select the channel you want to record with the cable box or satellite box. Leave the cable box or satellite box on for timer recording. is on or flashes, or during a timer recording. Press the POWER button to turn on the VCR. Press the VCR/TV button to choose VCR position. Press the DVD button on the remote control to choose DVD mode, then continue with the other DVD features as described in this manual. You don't have to set the TIMER off to use the DVD. 7) Set the tape speed Press the PLAY button or the STOP button repeatedly for the desired tape speed. Then, press the F. FWD button. ONE TIME PROGRAM PROGRAM NUMBER 4 DATE 05 /13 MON START TIME 07: 30 PM END TIME 08: 30 PM CHANNEL 16 REC SPEED SP SP SLP TO STOP AN AUTOMATIC TIMER PROGRAM ALREADY STARTED Press the STOP/EJECT or the TIMER SET button on the DVD /VCR. 5 To set another program, repeat step [4]. To exit from the set up screen, press the CLEAR/C. RESET button (You only exit from the set up screen. the information you entered for the timer recording will not be cleared). TO CHECK, CORRECT, OR CANCEL AN AUTOMATIC TIMER PROGRAM 1 Turn the power on by pressing the POWER button. (If the VCR is in TIMER STANDBY status, press the TIMER SET button instead of the POWER button. ) 6 When you finish programming, press the TIMER SET button to activate the timer. ¡As the TIMER SET light comes on the VCR switch- 2 Select main menu by pressing the MENU button. es to STANDBY status, and switches to DVD OUTPUT mode automatically. ¡When DVD sits idle for more than thirty-five minutes, the DVD power will be turned off automatically. If you press the TIMER SET button under such condition, the VCR power will be turned off and switch to STANDBY status. 3 Select "TIMER PROGRAMMING" by pressing the PLAY or the STOP button. Then, the F. FWD button. 4 Select the program number which you want to check by pressing the PLAY or the STOP button. ¡The details of the selected program appears on the TO CLEAR A PROGRAM Follow the steps from 2 to 3. [. . . ] El sintonizador explora y memoriza todos los canales activos de su área. 5 Después de explorar, el sintonizador de detiene en el canal memorizado más bajo. La pantalla de TV retorna al modo TV. 3 Seleccione el Idioma en la pantalla ("INGLÉS", "FRANCÉS" o "ESPAÑOL") presionando [PLAY] o [STOP]. Luego, presione [F. FWD]. ­ 46 ­ SP 1L25 PREPARACIÓN DE RELOJ VCR Ajuste el reloj con precisión para grabación con temporizador automática adecuada. Le sugerimos que usted utilice un TV o estación de radio como su fuente de tiempos. REPRODUCCIÓN DE UN DISCO REPRODUCIENDO UN DVD, VIDEO O UN CD AUDIO DVD Para empezar Conecte la alimentación del TV, amplificador y cualquier otro componente que se encuentre conectado al DVD. [. . . ]