User manual FUNAI SSC199V

[. . . ] THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The caution marking is located on the rear of the cabinet. IMPORTANT SAFEGUARDS 1. Read instructions-All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions-The safety and operating instructions should be retained for future reference. 3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. [. . . ] Press the STOP button when recording or playback is completed. 4 To activate "ZERO RETURN" mode - TV/VCR SETUP TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] B ZERO RETURN TIME SEARCH INDEX SEARCH Press the SETUP button on the remote control. Press the Arrow K or L button to point to "ZERO RETURN". The counter will appear on the TV screen. The tape will automatically stop when the counter returns to 0:00:00. Press the Arrow K or L button until your desired time appears. (Example: "2:50" stands for 2 hours 50 minutes) If you wish to cancel the Time Search at this point, press the SETUP button on the remote control. 4 Begin Time Search By pressing the Arrow s or B button, the TV/DVD/VHS will rewind or fast forward to the specified point. The time counts down as the searching progresses. When 0:00 is reached, the tape will start playback automatically. TIME SEARCH The Time Search function makes it possible to quickly advance the tape to your desired position simply by entering the exact amount of playback time you want to skip. NOTES: · Time Search can be set up to a maximum of 9 hours 50 minutes (9:50) by 10 minutes at a time. TO CANCEL THE TIME SEARCH at this point Press the STOP/EJECT button on the TV/DVD/VHS or the remote control. This will delete the selected time. - 28 - EN 1C29 INDEX SEARCH This feature provides a method of indexing the starting point so that it can be easily returned to in either fast forward or rewind mode. · The index mark will be made automatically when the REC button is pressed. It will also be marked at the starting point of Timer recording and OTR. Press the PAUSE or RECORD button to resume recording. NOTES: · After five minutes, the TV/DVD/VHS will automatically switch to the Recording mode to prevent tape damage. · If "CLOSED CAPTION (ON)" is selected, the OnScreen Display will appear for 5 seconds, then disappear. PAUSE SP 1 Select the channel to be recorded Press the number buttons on the CH 10 remote control or the CHANNEL K or L button. Remember: If the TV/DVD/VHS is connected to a cable box or satellite box, the TV/DVD/VHS must be on CH3 or CH4, then the channel to be recorded must be selected on the cable box or satellite box. 2 Select the tape speed Press the SPEED button to select the desired tape speed (SP/ SLP). SP 3 Begin recording REC Press the RECORD button. SP 4 Stop recording Press the STOP button when recording is completed. - 30 - EN 1C29 OTR (One Touch Recording) This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/DVD/VHS. · TV/DVD/VHS power must be turned on. · Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording. ) NOTES: · This function CANNOT be done from the remote control. · Recording starts immediately when the REC/OTR button is pressed. · When the REC/OTR button is pressed 18 times, the TV/DVD/VHS returns to the Normal Recording mode. · To stop the OTR operation, press the STOP button on the TV/DVD/VHS or on the remote control. · To show the remaining time, press the DISPLAY button on the remote control so that "OTR" appears on the TV screen. [. . . ] (Ejemplo: 5, PM) Luego, pulse el botón F. FWD/B. 7 Pulse el botón PLAY/K o STOP/L hasta que aparezca el minuto deseado. (Ejemplo: 40) 8 Pulse el botón SRTUP en el mando a distancia. Aunque los segundos no se visualizan, éstos empiezan a contar desde 00 cuando se pulsa SETUP en el mando a distancia. Utilice esta función para sincronizar el reloj con la hora correcta. 5 El sintonizador se para en el canal memorizado más bajo. [. . . ]