Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual FUNAI SSF420TR. We hope that this FUNAI SSF420TR user guide will be useful to you.
Lastmanuals help download the user guide FUNAI SSF420TR.
Detailed instructions for use are in the User's Guide.
[. . . ] OWNER'S MANUAL
COLOR TV/VCR/DVD TRIPLE COMBO
SSF420TR
(20 inch)
SUPPLIED ACCESSORIES
ACCESSORIES Batteries PART NO. 2 AA Batteries 1EMN20126 Remote Control Unit NE236UD
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
As an ENERGY STAR ® Partner, our company has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. registered mark.
Owner's Manual
If you need additional operating assistance after reading this owner's manual, please call TOLL FREE : 1-800-968-3429. Please read before using this equipment
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. [. . . ] · This TV/VCR/DVD cannot record the contents from the built-in DVD.
NORMAL RECORDING
TV/VCR
You can ONLY watch the same TV program that is being recorded.
SKIPPING UNWANTED SCENES DURING RECORDING
TV/VCR
Press the PAUSE button to temporarily stop recording. Press the PAUSE or RECORD button to resume recording. NOTES: · After 5 minutes, the TV/VCR/DVD will automatically switch to the Recording mode to prevent tape damage. · If "CLOSED CAPTION (ON)" is selected, the OnScreen Display will appear for 5 seconds, then disappear.
PAUSE SP
1
Select the channel to be recorded
Press the number buttons on the CH 10 remote control or the CHANNEL button K or L. Remember: If the TV/VCR/DVD is connected to a cable box or satellite box, the TV/VCR/DVD must be on CH3 or CH4, then the channel to be recorded must be selected on the cable box or satellite box.
2
Select the tape speed
Press the SPEED button to select the desired tape speed (SP/ SLP).
SP
3
Begin recording
REC
Press the RECORD button.
SP
4
Stop recording
Press the STOP button when recording is completed.
- 30 -
EN
1C29
OTR (One Touch Recording)
TV/VCR
This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/VCR/DVD. · TV/VCR/DVD power must be turned on. · Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording. ) NOTES: · You cannot start OTR with the remote control. · Recording starts immediately when the REC/OTR button is pressed. · When the REC/OTR button is pressed 18 times, the TV/VCR/DVD returns to the Normal Recording mode. · To stop the OTR operation, press the STOP button on the TV/VCR/DVD or on the remote control. · To show the remaining time, press the DISPLAY button on the remote control so that "OTR" appears on the TV screen. (It will show up momentarily then disappear. ) · Recording stops when 0:00 is reached. · Please note that in the SLP mode maximum recording time, assuming the tape is started at the beginning, is 8 hours using T-160 (or 6 hours using T-120). · If the tape runs out before the end time, the TV/VCR/DVD will switch to the Stop mode immediately, ejects the tape and turns itself off. · If you press the POWER button during OTR, the TV/VCR/DVD continues recording until the selected length is reached.
POWER SELECT
Push(es) 1 push 2 pushes 3 pushes 17 pushes
Display 0:30 1:00 8:00
Recording length (normal recording) 30 minutes 60 minutes 480 minutes
COPYING A VIDEO CASSETTE (Requires a VCR or camcorder)
TV/VCR
You can make copies of video tapes made by friends or relatives for your enjoyment. WARNING: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws. Connect your TV/VCR/DVD and a Source (Playing) VCR or camcorder using the following diagram.
[The TV/VCR/DVD]
EL REC/OTR REC/OTR REW PLAY F. FWD STOP HEADPHONE VIDEO L AUDIO R
[Fig. 8]
EJECT
[Ex: Source (playing) VCR or camcorder] Audio/Video adapter cable (not supplied)
AUDIO L OUT R VIDEO OUT IN IN
1
Select the channel to be recorded
Press the number buttons on the remote control or the CHANNEL button K or L. Remember: If the TV/VCR/DVD is connected to a cable box or satellite box, the TV/VCR/DVD must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box.
2
Select the tape speed
Press the SPEED button to select the desired tape speed (SP/ SLP).
3
Begin OTR
OTR(2 : 30)
Press the REC/OTR button on the TV/VCR/DVD as many times as needed. The recording length will be determined by the number of times you press the REC/OTR button. Each additional push will increase the recording time by 30 minutes. It is set up to a maximum of 8 hours.
SP
1)Insert a pre-recorded video cassette into the Source (Playing) VCR or camcorder. [. . . ] 5) Pulse el botón K o L hasta que aparezca el año deseado. (Ejemplo: 2004) Luego, pulse el botón B. 6) Pulse el botón K o L hasta que aparezca la hora deseada. (Ejemplo: 5, PM) Luego, pulse el botón B. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE FUNAI SSF420TR
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual FUNAI SSF420TR will begin.