User manual FUNAI SSV6001

[. . . ] OWNER'S MANUAL VIDEO CASSETTE RECORDER SSV6001 TABLE OF CONTENTS s IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 s PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 s FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 s OPERATING CONTROLS AND FUNCTIONS . . . . . . . . . [. . . ] S-VHS Quasi Playback (SQPB) This unit allows you to view a tape recorded in S-VHS format. (Noise lines may appear on the picture. ) To stop playback, press 4 the STOP button. STILL/SLOW 1) You can freeze the picture on TV screen by pressing the PAUSE/STILL button during playback. q You can advance the picture by one frame at a time by pressing the PAUSE/STILL button during the still mode. 2) You can see the slow motion by pressing the SLOW button during playback or the still mode. q If the noise bar appears on the TV screen, you can reduce it by pressing the CHANNEL Up or Down button. q After the VCR has been in Still/Slow mode for 5 minutes, it will stop automatically to protect the tape and the video head. q To return playback, press the PLAY button. INDEX SEARCH The index signal is recorded on the tape automatically when the recording is started. If you want to view a recording at a specific start point, it can easily be done. 1) Press the SEARCH MODE button so that the Index Search menu appears. 2) Enter your desired number by pressing the PLAY or STOP button within 30 seconds. 3) Press the F. FWD or REW button to start index search. If you want to go in the forward direction, press the F. FWD button. If you want to go in the reverse direction, press the REW button. q After index search, the VCR will play the tape automatically. INDEX SEARCH 03 AUTO REPEAT PLAYBACK Use this feature allows you to play a tape over and over. 1) Select main menu by pressing the MENU button. 2) Select "AUTO REPEAT" by pressing the PLAY or STOP button. 3) Begin auto repeat playback by pressing the F. FWD button so that [ON] will appear next to "AUTO REPEAT" on the TV screen. q If the on-screen menu still remains, press the RESET/EXIT button to exit the menu. q To cancel the auto repeat mode, press the F. FWD button at step [3] so that [OFF] appear next to "AUTO REPEAT" on the TV screen. q When you set the auto repeat mode to [ON] while the counter memory mode is ON, the VCR will exit the counter memory mode automatically. -9- EN 0J01 RECORDING FUNCTION Before recording, make sure: q The desired channel is selected by pressing the number buttons on the remote control or the CHANNEL Up/Down button. (If you connected the VCR to a cable box or satellite box as in "Basic connections" on page 6, select the VCR to channel 3 or 4 the same channel as the CH3 or CH4 switch on the back of the VCR. Then, select the channel you want to record at the cable box or satellite box. [. . . ] Tomas de salida de audio (AUDIO OUT) - Conéctelas a las tomas de entrada de audio de su equipo de audio o de otra videograbadora. Tomas de entrada de audio (AUDIO IN) - Conéctelas a las tomas de salida de audio de su equipo de audio o de otra videograbadora. IN) - Aquí se conecta una antena, sistema de televisión por cable o sistema de emisiones vía satélite. Toma de salida de vídeo (VIDEO OUT) - Conéctela a la toma de entrada de vídeo de su videocámara o de otra videograbadora. [. . . ]