User manual FUNAI ST191GA

[. . . ] THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The caution marking is located on the rear of the cabinet. IMPORTANT SAFEGUARDS 1. Read instructions-All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions-The safety and operating instructions should be retained for future reference. 3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. [. . . ] Then press the ENTER button. 2 Enter your desired number INDEX SEARCH 03 Press the Arrow button K or L until the number of programs that you want to skip appears. (Example: "03" for 3 programs) · The Index Search mode will be canceled if the procedures are not activated in 30 seconds. 3 Begin Index Search Press the Arrow button s or B. The TV/VCR/DVD begins rewinding or fast forwarding to the beginning of desired program. NOTE: Every time an index signal is skipped, the number in the program indicator decreases by one. End of tape Pro. 6 Pro. 7 4 After Index Search 4 3 2 1 1 2 3 INDEX MARK When the preset program is reached, the TV/VCR/DVD will start playback automatically. · A video cassette must be inserted in the TV/VCR/DVD for this function to work. · The number of Index Searches can be set up to 20. · This function will not operate in the recording mode. · When you want to cancel the Index Search while in progress, press the STOP button. SPECIAL FEATURES REAL TIME TAPE COUNTER TV/VCR This shows the elapsed recording or playback time in hours, minutes, and seconds. (The displayed time will not change on a blank tape or blank portions on the tape. )The "­" indication will appear when the tape has rewound further than "0:00:00" on the tape counter. AUTO REWIND-EJECT TV/VCR · When the end of a tape is reached during recording, playback, or fast-forward, the tape will automatically rewind to the beginning. After rewinding finishes, the TV/VCR/DVD will eject the tape and turn itself off. This function is operative when Repeat Play is set to the [OFF] position. Remember: If the TV/VCR/DVD is connected to a cable box or satellite box, the TV/VCR/DVD must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box. 2 Select the tape speed Press the SPEED button to select the desired tape speed (SP/ SLP). 3 Begin OTR OTR(2 : 30) Press the REC/OTR button on the TV/VCR/DVD as many times as needed. The recording length will be determined by the number of times you press the REC/OTR button. Each additional push will increase the recording time by 30 minutes. It is set up to a maximum of 8 hours. SP 1)Insert a pre-recorded video cassette into the Source (Playing) VCR or camcorder. 2)Insert a blank video cassette or one you want to record over, into the unit's cassette compartment. 3)Press the SPEED button on remote control for the TV/VCR/DVD to select the desired recording speed (SP/SLP). 4)Press the CHANNEL button K or L on the unit until "AUX" appears on the screen. 6)Begin playback of the tape in the source (Playing) VCR or camcorder. NOTE: For best results during copying, use the unit's front panel controls whenever possible. The remote control might affect the source (Playing) VCR's playback operation. 7)To stop copying, press the STOP/EJECT button on the unit, then stop the tape on the source VCR or camcorder. [. . . ] 3) Pulse el botón K o L hasta que aparezca el mes deseado. (Ejemplo: Mayo - 05) Luego, pulse el botón B. 4) Pulse el botón K o L hasta que aparezca el día del mes deseado. (Ejemplo: 6 - 06) Luego, pulse el botón B. [. . . ]