User manual FUNAI T19WF

[. . . ] 2. Retain Instructions-The safety and operating instructions should be retained for future reference. 3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions-All operating and use instructions should be followed. 5. Cleaning-Unplug TV/DVD from the wall outlet before cleaning. [. . . ] ¡If turn off the TV/DVD, resume function will be cancelled. 4 To return to normal playback, press PLAY. PAUSE DVD-V CD 1 During playback, press PAUSE. ¡Playback will pause and sound will be muted. 2 To continue playback, press PLAY. Note for using buttons on the main unit: Press PAUSE, then, press and hold down the SKIP G/ SEARCHg or SKIPH /SEARCHh on the TV/DVD for a few seconds to begin Search in 1/16 speed of the normal playback. Press and hold down again to change speed to 1/8. Repeat this procedure to change to 1/2. STEP BY STEP PLAYBACK DVD-V 1 During playback, press PAUSE. ¡Playback will pause and sound will be muted. ZOOM DVD-V The Zoom function allows you to enlarge the video image and to pan through the enlarged image. 2 The disc goes forward by one frame each time PAUSE is pressed. 1 Press ZOOM during playback. 2 Press ZOOM repeatedly to select the required zoom factor: ZOOM1, ZOOM2, ZOOM3, or OFF. 3 To exit step by step playback, press PLAY. FAST FORWARD/REVERSE SEARCH DVD-V CD MP3 1 During playback, press FWD g or REV h repeatedly to select the required forward or reverse speed: x2, x8, x50, x100. ¡For audio CDs, the speed is fixed at ×16. ¡For MP3, the speed is fixed at ×8. 3 Use the Arrow (K/ L/s / B) to move the zoomed picture across the screen. 4 To exit zoom mode, press ZOOM to OFF. NOTES ¡Zooming function does not work while disc menu is shown. ¡Zooming function is not available on some discs. 2 To return to normal playback, press PLAY. Note for using buttons on the main unit: During playback, press and hold down the SKIP G / SEARCHg or SKIPH /SEARCHh on the TV/DVD for a few seconds to begin Search in x2 speed. Press and hold down again to change speed to x8. Repeat this procedure to change to x50 and x100. ­ 20 ­ EN 0C28 SEARCH FUNCTION TRACK SEARCH CD There are three ways to begin playback on an Audio CD at a specific Track. Using Number on the remote control TIME SEARCH DVD-V CD 1 During playback, press SEARCH MODE three times (CD: twice) to display the Time Search on the TV screen. 1 Press Number to enter the desired Track number. 2 Press or to select a track, then press ENTER. ¡Press CLEAR to erase the TOTAL time you press the button. CHAPTER TITLE (current chapter repeat) (current title repeat) OFF (repeat off) most recently entered program. NOTES ¡Repeat Title/Chapter is not available with some scenes. ¡The REPEAT setting will be cleared when moving 3 Repeat step 2 until you have selected all the tracks you want to play in the program. to other title or chapter. REPEAT TRACK CD To activate the repeat function, press REPEAT during playback. ¡The repeat mode changes as described below every 4 Press PLAY to play the programmed tracks. NOTES ¡While the program is being played back, the STOP works as follows. ¡Press STOP once and then PLAY again, playback time you press the button. TRACK (current track repeat) ALL (entire disc repeat) OFF (repeat off) NOTES ¡Repeat setting will be cleared when moving to other track. ¡Repeat playback does not function during repeat A- will restart from the point where STOP was pressed. (Program continued) ¡Press STOP twice and then PLAY again, playback will restart from the track in the usual way. (Program cleared) ¡Up to 99 programs can be entered. ¡If you like to repeat the current track in the program, press REPEAT repeatedly until TRACK appears during playback. If you like to repeat the entire program press REPEAT repeatedly until ALL appears during playback. B playback. RANDOM PLAYBACK CD This shuffles the playing order of tracks instead of playback in the sequence. REPEAT A-B DVD-V point. ¡ CD 1 Press REPEAT A-B at your chosen starting A- appears briefly on the TV screen. 1 In stop mode, press MODE twice. ¡RANDOM screen appears. RANDOM CD [AUDIO] TOTAL 0:45:55 RANDOM PROGRAM - - no indication - - 2 Press REPEAT A-B again at your chosen end point. ¡ A-B appears briefly on the TV screen, and the repeat sequence begins. PLAY 3 To exit the sequence, press REPEAT A-B. NOTES 2 Press PLAY to start random playback. ¡The repeat A-B section can only be set within the cur- NOTE rent title (for DVDs), or current track (for audio CDs). [. . . ] NOTA: Si aparecen algunos dígitos en la esquina de la pantalla, pulse POWER sin desenchufar el cable de la alimentación. 2 Encienda el televisor/DVD Pulse POWER para encender el televisor/DVD. 3 Seleccione el idioma de la pantalla Pulse K o L para apuntar a "LANGUAGE". Luego, pulse ENTER para seleccionar "ENGLISH" o "ESP" = Spanish o "FRA" = French. [. . . ]