User manual FUNAI TD6D-D4413DB

[. . . ] Introduction Connections HDD & DVD / VIDEO CASSETTE RECORDER TD6D-D4413DB OWNER'S MANUAL PAL SECAM Basic Setup / TV View Operation Recording Playback Editing Function Setup VCR Functions Others For Customer Use: Carefully read the Model No. located at the back of the unit and enter the information below. Retain this information for future reference. __________________________ EN 1 . Introduction Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] If the title was in the resume stop mode, the dubbing will start from the beginning to the end of the resume stopped title. When dubbing from HDD to DVD or VR mode DVD-RW to HDD, recording speed will automatically be set to "High" whenever the conditions are met. (See page 41. ) If the high speed dubbing is not available, the title will be dubbed in normal speed with the recording speed of the title. If the title is recorded in other brand's DVD recorder, the title will be dubbed in normal speed with the recording speed that you set with [REC SPEED]. If there is not enough space left on the disc for high/normal speed dubbing with the title's recording speed, the title will be dubbed in normal speed with "Auto" mode. If there is not enough space left on the disc for normal speed dubbing with SLP mode, the title will be dubbed in normal speed with SLP mode until the space of the disc runs out. If you press [DUBBING HDD M DVD] on the front panel in stop mode without selecting any title, the unit will start dubbing the last title in the Original List or the Playlist. It will start dubbing the title in the Original List if the Original List was the last selected list. It will start dubbing the title in the Playlist if the Playlist was the last selected list. 42 EN One Touch Dubbing from VCR to DVD Selected Title Dubbing Video VR Introduction HDD DVD-RW DVD-RW DVD-R VCR If you want to record a title in the videotape, press [VCR] first. 1 2 In stop mode, press [SETUP]. Select "Dubbing" using [K \ L], then press [ENTER\OK]. Connections 1 2 3 Press [PLAY B] to start the playback of the videotape you want to dub. Press [STOP C] or [PAUSE F] where you want to start dubbing. Press [DUBBING VCR M DVD] on the front panel. The dubbing will start from there to the end. Setup General Setting Timer Programming Title List DVD Menu HDD Menu Dubbing Basic Setup / TV View Operation To stop the dubbing in progress: Press [STOP C] on the front panel. Press [STOP C] for 2 seconds on the remote control. Note When dubbing starts, the video image may be distorted because of the Digital Tracking function. Play the videotape until the image clears up and then start the dubbing. Dubbing takes as much time as the playback does. HDD to DVD / DVD to HDD / HDD to VCR / DVD to VCR 3 Select your desired dubbing direction using [K \ L], then press [ENTER\OK]. (Refer to "VCR to HDD / DVD" on page 44. ) e. g. ) HDD A DVD Dubbing HDD DVD HDD VCR DVD VCR DVD HDD VCR HDD VCR DVD Recording One-Title Dubbing between HDD and DVD Video VR Playback DVD-RW DVD-RW DVD-R This function lets you select one specific title from the title list for dubbing. HDD If you want to dub a title in the HDD, press [HDD] first. If you want to dub a title in a disc, press [DVD] first. 4 Select "Add" using [K \ L], then press [ENTER\OK]. HDD DVD Editing 1 2 3 Press [TOP MENU]. Select a desired title to be dubbed using [K \ L \ 0 \ 1], then press [ENTER\OK]. Select "Dubbing" using [K \ L], then press [ENTER\OK]. e. g. ) HDD Original Resume Playback Play From Start Edit Title Delete Add to Playlist Delete Multiple Titles Dubbing 3000 MB Dubbing List Add Delete All Dubbing Start Function Setup 1/1 VCR Functions If you have registered any dubbing before, they will be listed in the dubbing title list. 4 Select "Yes" using [K \ L], then press [ENTER\OK]. Start Dubbing?Yes No 5 Select a desired title using [K \ L \ 0 \ 1], then press [ENTER\OK]. The title is now registered in the dubbing list. To cancel selected title: Select a title using [K \ L \ 0 \ 1], then press [ENTER\OK] again. Dubbing of the selected title will start. To stop the dubbing in progress: Press [STOP C] on the front panel. [. . . ] (The maximum is 99) Recording Error You cannot record more than 999 chapters on one disc. (The maximum is 999) Recording Error You cannot record on this disc as Control Information is full. Cause You are trying to record onto the VR mode DVD-RW disc that has no space for recording. You are trying to record onto the DVD-RW / -R disc on which the number of recorded titles has reached the maximum (99). You are trying to record onto the VR mode DVD-RW disc on which the number of recorded chapters has reached the maximum (999). [. . . ]