User manual FUNAI VR79WF

[. . . ] 2. Retain Instructions-The safety and operating instructions should be retained for future reference. 3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions-All operating and use instructions should be followed. 5. Cleaning-Unplug TV/DVD from the wall outlet before cleaning. [. . . ] · Specific time playback is not available with some discs or if the unit is in stop mode. - 23 - EN 0C28 PLAYING FROM A DESIRED TITLE OR CHAPTER DVD REPEAT DVD CD · Press the number buttons to enter the desired chapter number during playback. The selected chapter will be located within the current title and then played back. · Title search starts when any number button is pressed during stop mode. You can also press the SEARCH MODE button, use the number or K/L buttons to enter the chapter number, and then press the PLAY button. SEARCH/CHAPTER · For title search, call up the chapTOTAL CHAPTERS: 027 ter search screen, press the CHAPTER [ 15 ] _ SEARCH MODE button, and then operate in the same manner Start Exit as above. Pressing the SEARCH MODE butSEARCH/TITLE ton during playback causes the curTOTAL TITLES: 07 rent chapter or title number to be TITLE [ 5 ] _ displayed in square brackets. NOTE: Playback from a desired title or chapter is not available with some DVDs. Start Exit 1 Press the REPEAT button. For DVDs · A single title or chapter is played back repeatedly. · Pressing the REPEAT button cycles the display on the screen as follows. REPEAT [CHAPTER] The current chapter is played back repeatedly. The current title is played back repeatedly. No repeat playback. REPEAT [TITLE] REPEAT [OFF] · If normal playback is performed after REPEAT CHAPTER has been selected without any chapter number entered, the first chapter is played back repeatedly. If the chapter number is changed using the number buttons or the SKIP buttons (H G) during playback, the newly selected chapter is played back repeatedly. If that language is not available on a disc, a language defined by the disc is selected. · The screen display will disappear after about 15 seconds. · If you use DIGITAL AUDIO OUT jack, the sound mode of audio CDs can not be changed. AUDIO 8 : J P N / 8 HELLO Bon jour For audio CDs Press the AUDIO button during playback. · Pressing the K/L buttons cycles the sound mode through STEREO, L-CH and R-CH. AUDIO S T E R E O Both right and left channels are active (stereo). Only the right channel is active. AUDIO R-CH Only the left channel is active. AUDIO L-CH - 26 - EN 0C28 CHANGING THE SUBTITLE LANGUAGE DVD The TV/DVD has a function which allows you to select the desired language for subtitles. Press the SUBTITLE button during playback, and L then press the K/L buttons to select the desired subtitle language. CHANGING THE CAMERA ANGLE (Multi-Angle Pictures) DVD The TV/DVD has a function which allows you to select the desired camera angle. 1 Press the ANGLE button during playback. · · · The subtitle language can be changed if the subtitles are recorded in multiple languages on the DVD being played. The subtitle language cannot be changed if the subtitles are recorded in a single language on the DVD being played. SUBTITLE 1 : E N G / 8 · If the disc contains sequences recorded from different camera angles, the angle icon ( ) will appear at the bottom-right of the screen. You can change the camera angle when the icon appears on the screen. The camera angle cannot be changed if the disc does not contain sequences recorded from different camera angles. Subtitle 1 2 L Press the K/L buttons while the angle number is shown on the screen. ANGLE [ 1 ] / 8 SUBTITLE 2 : F R E / 8 Subtitle 2 Angle 1 (default) SUBTITLE 0 : O F F / 8 No subtitles ANGLE [ 2 ] / 8 Angle 2 ANGLE [ 8 ] / 8 Angle 8 HELLO Bon jour · Pressing the K/L buttons cycles the subtitle language from SUBTITLE 1, SUBTITLE 2 and all the languages recorded through to OFF. NOTE: · The screen display will disappear after about 15 seconds. NOTES: · Some discs allow subtitle language setting on the disc menu. (Operation varies between discs, so refer to the manual accompanying the disc. ) · If the desired language is not shown after pressing the K/L buttons several times, the disc does not have subtitles in that language. · The subtitle language resets to the one which has been selected in the setup mode, every time the power is turned on or discs are replaced. If that language is not available on a disc, a language defined by the disc is selected. · It may take time to display the subtitles in the selected language. · The screen display will disappear after about 15 seconds. - 27 - EN 0C28 CHANGING THE ON-SCREEN DISPLAY DVD CD You can check the information about the disc by pressing the DISPLAY button on the remote control. [. . . ] 3) La reproducción empezará desde el título seleccionado. · · UTILIZACIÓN DEL MENÚ DE TÍTULOS DVD Con un DVD que tenga un menú de títulos, usted podrá seleccionar los títulos deseados en el menú. El menú de títulos aparecerá. Pulse los botones de las flechas (K/L/B/s) para cambiar el ajuste, y luego pulse el botón ENTER. · · RECUPERACIÓN DE UNA PANTALLA DE MENÚS DURANTE LA REPRODUCCIÓN Para DVDs Pulse el botón MENU para recuperar el menú del DVD. Pulse el botón TITLE para recuperar el menú de títulos. · · · NOTA: El contenido de los menús y las operaciones con menús correspondientes pueden cambiar según los discos, Consulte el manual entregado con el disco para conocer detalles. - 42 - ES 0C28 MEMO - 43 - ES 0C28 LIMITED WARRANTY FUNAI CORP. [. . . ]