User manual FUNAI W3913LCV

[. . . ] CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. LOCATION: INSIDE, NEAR THE DECK MECHANISM. FCC WARNING- This equipment may generate or use radio frequency energy. [. . . ] This is not a malfunction. USING THE DVD MENUS DVD Some DVDs contain their own menus, such as a guidance menu which describes the contents of the disc or a selection menu for sound, language and other customized settings. 4 Press the PLAY button. ¡The tray will close automatically, and playback will then start from the first chapter or track of the disc. You need to press the PLAY button only when the tray has been closed by pressing the OPEN/CLOSE button. ¡When you playback the DVD which a title menu is 1 Press the MENU button. ¡The DVD menu will appear. 2 Select the desired title. ¡Press the arrow buttons (L/K/B/s) to change the recorded, it may appear on the screen. In this case, refer to "USING THE TITLE MENU". setting, and then press the ENTER button. 5 Press the STOP button to stop play. 3 Playback will start from the selected title. ­ 13 ­ EN 1A23 USING THE TITLE MENU DVD With a DVD containing a title menu, you can select desired titles from the menu. RESUMING PLAYBACK FROM THE POINT WHERE PLAYBACK STOPPED DVD CD 1 Press the STOP button during playback. 1 Press the TITLE button. ¡The title menu will appear. ¡Playback will stop, and then appear the resuming message at the center. 2 Select the desired title. ¡Press the arrow buttons (L/K/B/s) to change the setting, and then press the ENTER button. Press 'PLAY' to play from here. To play the beginning, press 'STOP' first and then 'PLAY'. CALLING UP A MENU SCREEN DURING PLAYBACK For DVDs ¡Press the MENU button to call up the DVD menu. ¡Press the TITLE button to call up the title menu. 2 Press the PLAY button. Playback will start from the point where the previous playback session was stopped. B Note ¡Contents of menus and corresponding menu operations may vary between discs. Refer to the manual accompanying the disc for details. Note ¡The resume function can be reset by pressing the STOP button twice or by opening the disc loading tray. PAUSING PLAYBACK OR DISPLAYING A STILL PICTURE DVD CD STEPPING THROUGH FRAMES DVD 1 Press the PAUSE button while playback is paused. ¡The next picture frame is disF 1 Press the PAUSE button during playback. ¡Playback will pause, with sound F muted. played with sound muted each time the button is pressed. 2 Press the PLAY button to resume playback. B 2 Press the PLAY button to resume playback. B ­ 14 ­ EN 1A23 FAST FORWARD/REVERSE DVD CD STARTING FROM A DESIRED TRACK CD 1 Press the numeric buttons to enter the desired track number. ¡The selected track will be located, and playback will start. 1 Press the FWD g or REV h button during playback. ¡In the case of CD, Time Search in Track is effective. (But Time Search in the entire disc is ineffective. ) Note ¡Playback from a desired time count is not available ¡Program playback is not available during random with some discs or if the unit is in stop mode. ¡If wrong numbers are entered, press the CLEAR button and re-enter the correct numbers. MARKER DVD You can define the part to be called back. CD 1 Press the SEARCH MODE button three times during playback. Set the marker ¡Using the cursor (s/ B) button, position the cursor on to the marker number shown as "NOT SET". Press the ENTER button when the screen to be reviewed appears. Up to 5 points can be marked. 1 2 3 4 5 AC NOT SET Call back the marker ¡Using the cursor (s/ B) button, position the cursor on to the marker number to be called back and press the ENTER button. Clear the marker ¡Using the cursor (s/ B) button, position the cursor on to the marker number to be cleared and press the CLEAR button. To clear all markers, place the cursor on "AC" (All clear markers) and press the ENTER button. 2 Press the SEARCH MODE button or the RETURN button to exit the display. ­ 16 ­ EN 1A23 REPEAT DVD 1 Press the REPEAT button. CD A-B REPEAT DVD CD You can define a section to be played back repeatedly. For DVDs ¡A single title or chapter is played back repeatedly. ¡Pressing the REPEAT button cycles the display on 1 Press the A-B REPEAT button during playback. ¡The starting point (A) will then be REPEAT [A- ] the screen as follows. REPEAT [OFF] selected. No repeat playback. 2 Press the A-B REPEAT button again at the REPEAT [CHAPTER] The current Chapter is played back repeatedly. The current Title is played back repeatedly. end point (B) of the desired section. ¡The selected section will be REPEAT [TITLE] played back repeatedly. REPEAT [A-B] For audio CDs ¡The whole disc or a single track is played back 3 To exit A-B repeat playback, press the A-B REPEAT button and set it to OFF. REPEAT [ OFF ] repeatedly. ¡Pressing the REPEAT button cycles the display on the screen through Off, Track and All. [. . . ] Toma de salida de audio izquierda (AUDIO OUT) Toma de salida de vídeo (VIDEO OUT) Tomas de salida de vídeo componente Toma de salida de vídeo S (S-VIDEO OUT) 31. Toma de salida de audio digital coaxial (COAXIAL DIGITAL AUDIO OUT) 33. Toma de salida de audio derecha (AUDIO OUT) VISUALIZACIÓN Permanece encendido cuando está activada la función de repetición A-B. Permanece encendido cuando está activada la función de repetición. [. . . ]