User manual FUNAI W4913LTV

[. . . ] . 12 12 12 13 14 15 16 17 17 17 18 DVD Functions Playback . Track Search / Title/Chapter Search / Time Search . Repeat / Random / Programmed Playback . Repeat Playback / Repeat A-B Playback / Random Playback / Programmed Playback. [. . . ] NOTE (for Timer Recording) : · If there is a power failure or the unit is unplugged for more than 30 seconds, clock and all timer settings will be lost. ­ 13 ­ EN VCR Functions Repeat the procedure in steps 5) and 6) to set the end time. 10 SUBTITLE T-SET · The TIMER light on the front panel appears. The unit will change to the DVD mode. Copying a Video Tape Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws. (Back of TV) (Back of another source) DVD/VCR VCR AUDIO IN (Back of Recording DVD/VCR*) or COMPONENT VIDEO OUT AUDIO OUT Y AUDIO OUT L L CB R VIDEO OUT R Connect ANT-OUT 1 ANT-IN DIGITAL AUDIO OUT DVD AUDIO S-VIDEO OUT OUT DVD/VCR COMPONENT VIDEO OUT VCR AUDIO OUT ANT-IN L AUDIO IN Y L CB COAXIAL R CR Connect RF cable (supplied) 2 R VIDEO OUT R VIDEO IN VIDEO VIDEO OUT IN CR ANT-OUT Audio/Video cables (not supplied) 1) 2) 3) 4) *Front input jacks are also available Insert a pre-recorded tape into the playing VCR. Insert a tape with its record tab into the recording unit. Press [SPEED] on the remote control of the recording unit to select the desired recording speed (SP/SLP). Select the "L1"or "L2" position on the recording unit. · To use the input jacks on the back of this unit, select "L1" position by pressing [0], [0], [1] on the remote control or L [CHANNEL K/L]. · To use the input jacks on the front of this unit, select "L2" position by pressing [0], [0], [2] on the remote control or L [CHANNEL K/L]. 5) Press [REC/OTR] on the recording unit. 6) Begin playback of the tape in another source. A 7) To stop recording, press [STOP/EJECT C/A] on the recording unit, then stop playback of the tape in another source. Hint · For best results during dubbing, use the front panel controls whenever possible. The remote control might affect another source's operation. Approximate speed is 1(1/16), 2(1/8), 3(1/2). · Set "STILL MODE" to "FIELD" in the Display menu if pictures in the slow playback mode are blurred. (Refer to pages 20-21. ) Zoom DVD DVD-V Paused and Step-by-Step Playback DVD DVD-V CD 1) Press [ZOOM] during playback. 2) Press [ZOOM] repeatedly to select the required zoom factor: x2, x4 or OFF. x2 x4 Press [PAUSE k] during playback. To continue playback, press [PLAY B]. DVD-V The disc goes forward by one frame each time [PAUSE k] is pressed during the pause mode. To continue playback, press [PLAY B]. 3) Press [K / L / s / B] to slide the zoomed picture across the screen. 4) To exit zoom mode, press [ZOOM] to select OFF. Hint · Zooming function does not work while the disc menu is showing up. · x4 zoom is not available on some discs. · The picture may be distorted when you press [PAUSE k] or [REVh] repeatedly in the zoom mode. · It may take several seconds to slide the zoomed picture. Hint · On DVDs, set "STILL MODE" to "FIELD" in the Display menu if pictures in the pause mode are blurred. (Refer to pages 20-21. ) ­ 15 ­ EN DVD Functions Press [STOP C] during playback. [. . . ] · To set virtual surround on/off. · To open or close the disc tray. · To advance playback one frame at a time. · To arrange the playing order or play randomly. [. . . ]