User manual FUNAI WF20D4

[. . . ] OWNER'S MANUAL COLOR TV/DVD WF20D4 (20 inch) SUPPLIED ACCESSORIES Remote Control Unit Batteries Owner's Manual Owner's Manual INSTRUCCIONES EN ESPAÑOL INCLUIDAS. As an ENERGY STAR ® Partner, our company has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. registered mark. NE228UD 2 AA Batteries 1EMN20057 If you need additional assistance for set-up or operating after reading owner's manual, please call TOLL FREE : 1-800-242-7158. Or visit our WEB SITE at http://www. funai-corp. com Please read before using this equipment WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] ¡To cancel resume, press STOP twice. ¡If the unit is turned off, resume function will be can- celled. ¡For MP3, playback will resume from the beginning of the track at which playback was stopped. PAUSE DVD-V CD MP3 ferent depending on the disc. Approximate speed is 1(×2), 2(×8), 3(×50) and 4(×100). ¡For audio CDs, approximate speed is ×16. ¡For MP3, approximate speed is ×8 ¡When you use buttons on the front panel, press and hold SKIPG/ SEARCHg or SKIPH/ SEARCHh for a few seconds. 3 To return to normal playback, press PLAY. 1 During playback, press PAUSE. ¡Playback will pause and sound will be muted. 2 To continue playback, press PLAY. SLOW FORWARD / SLOW REVERSE DVD-V 1 During playback, press PAUSE. 2 Press FWD g or REV h. ¡" STEP BY STEP PLAYBACK DVD-V 1 During playback, press PAUSE. ¡Playback will pause and sound will be muted. 1" or " 1" appears on the screen. 3 To select another speed, repeat step [2] until your required speed appears on the screen. ¡Slow forward or reverse speed varies with the disc. 2 The disc goes forward by one frame each time PAUSE is pressed. Approximate speed is 1(1/16), 2(1/8) and 3(1/2). ¡When you use buttons on the front panel, press and hold 3 To exit step by step playback, press PLAY. SKIP G/ SEARCH g or SKIP H/ SEARCH h for a few seconds. 4 To return to normal playback, press PLAY. ­ 21 ­ EN 0C28 SEARCH FUNCTION TRACK SEARCH CD MP3 TIME SEARCH DVD-V CD There are three ways to begin playback on an Audio CD and MP3 at a specific track. Using the number buttons on the remote control 1 During playback, press SEARCH MODE three times (CD: twice) to display the Time Search on the TV screen. 1 Press the number buttons to enter the desired track number. ¡Playback will start at the selected track. ¡For single digit tracks (1-9), press a single number 2 Within 30 seconds, enter a desired disc time using the number buttons. ¡Playback will start at the specified time. ¡Press CLEAR to erase the incorrect input. ¡When there is no need to enter a number, "0" (eg. track 3, press 3). ¡To play track 26, press +10, 2, 6. appears automatically. For example, " 0 : 0 - : - -" appears in the Time Search display if the total time of the disc is less than 10 minutes. Using SEARCH MODE 1 Press SEARCH MODE. ¡The Track search display appears. MARKER SETUP SCREEN DVD-V CD 2 Within 30 seconds, select a desired track number using the number buttons. ¡For single digits press 0 first, if the total track of the Use markers to memorize your favorite places on a disc. disc is more than 10 tracks. ¡Playback will start at the selected track. 1 Press SEARCH MODE four times (CD: three times) during playback. ¡The display screen and Markers will appear on the Using SKIP H G During playback, press SKIP G to move the next track. Press it repeatedly to skip subsequent tracks. Press SKIP H to go back to beginning of the current track. [. . . ] Si la reproducción no empieza automáticamente, pulse PLAY. ¡Cuando reproduzca un DVD que tenga grabado un menú de títulos, el menú aparecerá en la pantalla. 5 Pulse el botón STOP para detener la reproducción. El sintonizador se detiene en el canal memorizado más bajo. · Cuando se activa AUTOPROGRAMACION DE CA, donde no hay entrada de señal del televisor, aparecerá "NO HAY SEÑAL DE TV" en la pantalla después de terminar la búsqueda de canales. [. . . ]