User manual FUNAI WSSC190

[. . . ] 2. Retain Instructions-The safety and operating instructions should be retained for future reference. 3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions-All operating and use instructions should be followed. 5. Cleaning-Unplug TV/VCR from the wall outlet before cleaning. [. . . ] Then, press the F. FWD/B button to select [BLOCK] or [VIEW]. Note: When you select [TV-MA], "D" does not appear on the TV screen. · The sub-ratings which set to [BLOCK] appears next to the rating category in the TV rating menu. TV­Y7 [BLOCK] B FV [BLOCK] TV­PG [BLOCK] BD L S V [BLOCK] [BLOCK] [BLOCK] [BLOCK] B TV­Y TV­Y7 ( ) TV­G TV­PG (DLSV ) TV­14 (DLSV ) TV­MA ( LSV ) [VIEW] [VIEW] [VIEW] [BLOCK] [BLOCK] [BLOCK] Press the PLAY/K or STOP/L button to point to "MPAA RATING". Then, press the F. FWD/B button. 4 Select your desired item G PG PG­13 BR NC­17 X [VIEW] [VIEW] [VIEW] [BLOCK] [BLOCK] [BLOCK] Press the PLAY/K or STOP/L button to point to your desired item. Then, press the F. FWD/B button to select [BLOCK] or [VIEW]. Selection G PG PG-13 R NC-17 X Rating Category Explanations General Audience Parental Guidance suggested. Unsuitable for children under 13 Restricted; under 17 requires accompanying parent or adult guardian No one under 17 admitted Mature audience only · When you select the rating category and turn it · 5 Exit the V-Chip setting mode Press the MENU button on the remote control to enter the setting and exit the screen. [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically. When you turn "G" to [VIEW], then all ratings will turn to [VIEW] automatically. EN 9I03 - 16 - 5 Exit the V-Chip setting mode 5 Exit the V-Chip setting mode Press the MENU button on the remote control to enter the setting and exit the screen. CHANGE ACCESS CODE To change access code, follow the steps. Press the MENU button on the remote control to exit the screen. Note: If you unplug the power code or power failure occurs, the changed access code will be lost and will return to default (0000). Avoid extreme heat, high humidity and magnetic fields from speaker systems. Do not tamper with the cassette mechanism. Do not touch the tape with your fingers. EN 9I03 NORMAL PLAYBACK Make sure . . . · TV/VCR power must be turned on. TO CANCEL THE REPEAT PLAY MODE Repeat steps [1] and [2], select [OFF] using the F. FWD/B or REW/s button on the remote control. Press the MENU button on the remote control to return to TV mode. If there is a power failure of any kind, the unit will retain its memory for this feature. 1 Insert a prerecorded tape If the erase-protection tab has been removed, the TV/VCR will start playback automatically. 2 SEARCH To begin playback PLAY B Press the PLAY button. Note: If any menu is activated on the screen, the PLAY button does not function. Press the MENU button to clear the menu, then press the PLAY button. PICTURE SEARCH This feature is very useful in finding or skipping over a particular scene on a tape. 1)You may view a video tape at a high speed in either a forward or reverse direction by pressing the F. FWD or REW button during playback (in the SP / LP / SLP modes). 2)Press it again and the TV/VCR will now search in super high speed (in the LP / SLP modes only). [. . . ] 4) Pulse el botón PLAY/K o STOP/L hasta que aparezca el día del mes deseado. (Ejemplo: 6 - 06) Luego, pulse el botón F. FWD/B. 5) Pulse el botón PLAY/K o STOP/L hasta que aparezca el año deseado. (Ejemplo: 2004) Luego, pulse el botón F. FWD/B. [. . . ]