User manual FURUNO 1722C

[. . . ] MARINE RADAR MODEL1722/1732/1742/1762 MODEL1722C/1732C/1742C/1762C C Yo u r L o c a l A g e n t/D e a le r 9-52, A shihara-cho, N ishinom iya, Japan Te l e p h o n e : Te l e f a x : 0 7 9 8 -6 5 -2 111 0798-65-4200 A ll rig h ts re s e rv e d . Printed in Japan FIRST EDITIO N D : : APR. OM E-34940 (D A M I) M O D E L1722/C S E R IE S SAFETY INSTRUCTIONS WARNING ELECTRICAL SHOCK HAZARD Do not open the equipment. Only qualified personnel should work inside the equipment. Do not disassemble or modify the equipment. [. . . ] For manual entry of waypoints, do the following: a) Press the [SAVE/MOB] key momentarily to enter a waypoint mark at own ship position. A new waypoint is created under the next consecutive waypoint number and that waypoint is added to the route. (You may close the SAVE ROUTE screen by pressing the RETURN soft by followed by the MENU key. ) b) Repeat step a) as necessary. To stop recording waypoints and save the route You can stop recording waypoints and save the route at any time as shown in the procedure below. When 35 waypoints have been entered the message "Total 35 WPTS have been already registered in the route. Stop creating voyage based route. " is displayed. In this case, save the route as shown below. Press the [MENU] key followed by the WAYPOINTS/ROUTES and CREATE VOYAGE-BASED ROUTE soft keys. Press the FINISH LOG soft key to stop recording waypoint and save the route. Press the [MENU] key to close the menu. 3-40 3. PLOTTER OPERATION 3. 9. 2 Connecting routes Two routes which you have created can be connected as follows to form a new route. If desired, enter the name for the new route and enter comment. Use the cursor pad and the [ENTER] knob to enter the route name for the first route, beneath FIRST in the CONNECT ROUTE window. ROUTE NAME NEW ROUTE F < -- > R 001 COMMENT CONNECT ROUTE FIRST ______ SECOND ______ FORWARD FORWARD SAVE CANCEL Connect route window 8. If necessary press the F< - ->R soft key to select direction to follow the waypoints of the route, forward or reverse. Enter the route name of the second route as you did for the first route. Note: The maximum number of waypoints in a route is 35. If this number is exceeded an error message appears. In this case, delete waypoints in one or both routes so the total number of waypoints does not exceed 35. 3-41 3. PLOTTER OPERATION 3. 9. 3 Inserting waypoints Waypoints can be inserted into a route as follows: Inserting waypoint from the route list 1. Press the LOCAL LIST soft key. ROUTE NAME: 001 COMMENT: 01 001WPT 34°44. 111'N 135°21. 134'W LEG v EDIT ROUTE INSERT WPT REMOVE WPT CHANGE WPT 02 003WPT 34°43. 432'N 135°41. 456'W 03 002WPT 34°14. 124'N 135°21. 567'W 04 005WPT 34°44. 569'N 135°21. 152'W 05 008WPT 34°54. 124'N 135°21. 888'W 29. 9° 12. 0nm 159. 9° 6. 00nm 50. 5° 29. 8nm 359. 9° 3. 0nm COORD TYPE RETURN Edit route menu 7. Press or to place the cursor at the location where you want to insert a waypoint. Press the INSERT WPT or CHANGE WPT soft key as appropriate. [. . . ] 4-24 Water temperature unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Waypoint marker (radar). . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-33 Waypoints changing size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-35 color. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]