User manual FURUNO 1723C

[. . . ] MARINE RADAR MODEL1722/1732/1742/1752/1762 MODEL1722C/1732C/1742C/1752C/1762C MODEL1723C/1733C/1753C/1763C Your Local Agent/Dealer 9-52 Ashihara-cho, Nishinomiya, Japan Telephone : fax : 0798-65-2111 0798-65-4200 All rights reserved. Printed in Japan FIRST EDITION : APR. OME-34940 ( HIMA ) MODEL1722/C SER. *00080918202* *00080918202* *00080918202* *OME34940G00* *OME34940G00* *OME34940G00* SAFETY INSTRUCTIONS WARNING ELECTRICAL SHOCK HAZARD Do not open the equipment. Only qualified personnel should work inside the equipment. Do not disassemble or modify the equipment. [. . . ] This feature is useful when you wish to retrace previous track. The "SAVE" icon appears at the top of the screen when a voyage-based route is being created. Press the CREATE VOYAGE-BASED ROUTE soft key. 001 LENGTH WAYPOINTS 35 25. 6 nm ROUTE 4. Press the NEW soft key to show the new route window. Note: If you want to tack voyage-based points on an existing route, press the SELECT ROUTE soft key instead of the NEW soft key, then enter route number to use. ROUTE NAME SAVE ROUTE BCKTRK TIME BCKTRK DIST Next consecutive route number 5. If required, you may change the route name and enter a comment. v NEW 002 LENGTH WAYPOINTS 2 56. 7 nm SELECT ROUTE 003 LENGTH WAYPOINTS 3 21. 1 nm 004 LENGTH WAYPOINTS 3 21. 1 nm PUSH ENTER KNOB TO SEARCH FOR RETURN --- Save route menu 006 COMMENT USE FURUNO BACK TRACK FUNCTION TO AUTOMATICALLY CREATE ROUTE BY TIME OR DISTANCE. MANUAL CANCEL Save route window 3-39 3. Choose how to record points for your route, by time, by distance or manual entry pressing by one of BCKTRK TIME, BCKTRK RANGE or MANUAL soft key as appropriate. For BCKTRK TIME, BCKTRK DIST one of the following displays appears. TIME INTERVAL DISTANCE INTERVAL 00h01m (When selecting BCKTRK TIME. ) 00. 1nm (When selecting BCKTRK DIST. ) Displays for entry of time, distance interval 7. Enter interval desired with the cursor pad and [ENTER] knob. Press the START LOG and RETURN soft keys followed by the [MENU] key to close the menu. At this moment, voyage based route will be created. For manual entry of waypoints, do the following: a) Press the [SAVE/MOB] key momentarily to enter a waypoint mark at own ship position. A new waypoint is created under the next consecutive waypoint number and that waypoint is added to the route. (You may close the SAVE ROUTE screen by pressing the RETURN soft by followed by the MENU key. ) b) Repeat step a) as necessary. To stop recording waypoints and save the route You can stop recording waypoints and save the route at any time as shown in the procedure below. When 35 waypoints have been entered the message "Total 35 WPTS have been already registered in the route. Stop creating voyage based route. " is displayed. In this case, automatically creating voyage-based route stops. Press the [MENU] key followed by the WAYPOINTS/ROUTES and CREATE VOYAGE-BASED ROUTE soft keys. Press the FINISH LOG soft key to stop recording waypoint and save the route. Press the [MENU] key to close the menu. 3-40 3. PLOTTER OPERATION 3. 9. 2 Connecting routes Two routes which you have created can be connected as follows to form a new route. [. . . ] 4-21 Water temperature graph. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23 Water temperature unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Waypoint marker (radar). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-30 Waypoints changing size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]