User manual FURUNO 1734C OPERATORS MANUAL

[. . . ] MODEL 1724C/1734C, GD-1720C OPERATOR'S MANUAL OPERATOR'S MANUAL Marine Radar MODEL 1724C/1734C Color Video Plotter GD-1720C (Elemental Chlorine Free) The paper used in this manual is elemental chlorine free. VX2 C Your Local Agent/Dealer 9-52 Ashihara-cho, Nishinomiya 662-8580, JAPAN Telephone : +81-(0)798-65-2111 Fax : +81-(0)798-65-4200 All rights reserved. Printed in Japan FIRST EDITION : APR. OME-35550 (HIMA ) M1704C SER & GD1720C http://www. furuno. co. jp/ SAFETY INSTRUCTIONS WARNING ELECTRICAL SHOCK HAZARD Do not open the equipment. Only qualified personnel should work inside the equipment. Do not disassemble or modify the equipment. [. . . ] Press the EDIT ROUTE and LOCAL LIST soft keys. Press the MENU key to close the menu. Removing a waypoint from the plotter display 1. Press the PLOT soft key to show the plot screen. 3-40 3. Operate the Cursor pad to place the cursor on the waypoint you want to remove from the route. The route is redrawn, eliminating the waypoint removed. Press the MENU key to close the menu. 3. 9. 5 1. 7. Erasing routes Press the MENU key to open the menu. You are asked if you are sure to erase the route. Push the ENTER knob to erase the route, or the CLEAR key to escape. Press the MENU key to close the menu. 3. 10 Navigation This section shows you how to get to a desired destination by "quick points, " waypoints, port services and routes. Note: Reciprocal setting and canceling of destination is available by outputting the data sentence ZDA from the NavNet unit connected to the navigator. 3. 10. 1 Navigating to a "quick point" The "quick point" feature allows you to navigate to point(s) without retaining the data indefinitely in your unit's memory. Selecting quick point entry method You need to tell your unit how to set the quick point: 1 POINT, 35 POINTS (up to 35 points) or 35PTS/FIND. (For how to navigate to points/port services see "3. 10. 3 Navigating to ports, port services" on page 3-43. ) 1. For C-MAP, press the PLOTTER SETUP, PROTTER SETTINGS soft keys in that order. Use the Cursor pad to select SET GOTO METHOD, then press the EDIT soft key. GOTO METHOD GOTO METHOD ¤ 1 POINT ¡ 35 POINTS ¡ 35PTS/FIND C-MAP ¤ 1 POINT ¡ 35 POINTS ¡ 35PTS/PORT SVC NavChart Go to method window 4. Press the MENU key to close the menu. 3-41 3. PLOTTER OPERATION Navigating to a single quick point 1. Place the cursor on an existing waypoint (GOTO WPT soft key appears) or a new location (GOTO CURSOR soft key appears). Select "1 POINT" following the procedure in the above paragraph. Depending on the selection you made at step 1, press the GOTO CURSOR or GOTO WPT soft key. A solid blue line with arrows connects between own ship and destination, which is marked as "<QP01>" for cursor-selected location or waypoint name in case of waypoint. This line shows the shortest course to the destination. [. . . ] 7-31 Loran C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-30 TD SETUP menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-29 Test menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6 Test pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]