User manual FURUNO 1953C OPERATORS MANUAL

[. . . ] MODEL 1823C MARINE RADAR MODEL 1833C MARINE RADAR MODEL 1933C MARINE RADAR MODEL 1943C MARINE RADAR MODEL 1953C MARINE RADAR COLOR VIDEO PLOTTER GD-1900C Your Local Agent/Dealer 9-52 Ashihara-cho, Nishinomiya, Japan Telephone : Telefax : 0798-65-2111 0798-65-4200 All rights reserved. Printed in Japan FIRST EDITION : APR. OME-35030 ( HIMA ) M1800C SER & GD1900C *00080919802* *00080919802* *00080919802* *OME35030G00* *OME35030G00* *OME35030G00* SAFETY INSTRUCTIONS WARNING ELECTRICAL SHOCK HAZARD Do not open the equipment. Only qualified personnel should work inside the equipment. Turn off the radar power switch before servicing the antenna unit. [. . . ] The waypoint moves to the cursor position and its position is changed on the waypoint list. If the waypoint is set as destination or is part of a route, you are asked if you are sure to move the waypoint. In this case, push the [ENTER] knob to move the waypoint, or press the [CLEAR] key to cancel. c) Press the [MENU] key to finish. Range and bearing from own ship to cursor 34° 22. 345'E 16. 0nm 86. 6°M TRIP NU 4. 53nm 99. 9 nm (1) Select waypoint to move, then press EDIT/MOVE and MOVE WPT soft keys. (2) Drag cursor to new position, then push the [ENTER] knob. FISH RNG BRG WP-002 BRIDGE CANCEL Press to alternately display range/bearing from own ship to cursor, range/bearing from original waypoint position to cursor position. Below is an example of the range/bearing from original waypoint position to cursor position. + Plotter display 34° 22. 3456'E FROM 5. 3°M FISH 1. 45 nm 3-32 3. PLOTTER OPERATION 3. 8. 3 Erasing waypoints Erasing a waypoint directly from the plotter display 1. Operate the trackball to place the cursor on the waypoint you want to erase. A flashing diamond mark appears over the waypoint when the waypoint is correctly selected. You are asked if you are sure to erase the waypoint. The waypoint is erased from the plotter screen and the waypoint list. Press the [MENU] key followed by the WAYPOINTS/ROUTES and WAYPOINTS soft key to open the waypoint menu. Operate the trackball to place the cursor on the waypoint which you want to erase. A flashing diamond mark appears on the waypoint when it is correctly selected. Press the EDIT/MOVE soft key followed by the ERASE WPT soft key. You are asked if you are sure to erase the waypoint. Push the [ENTER] knob to erase the waypoint. The waypoint is erased from the plotter screen and the waypoint list. Erasing a waypoint from the waypoint list 1. Press the WAYPOINTS/ROUTES and WAYPOINTS soft keys. [. . . ] 3-34 color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-29 editing from waypoint list . . . . . . . . . . . . . . . . . . . . . . . . . . 3-31 editing waypoint position . . . . . . . . . . . . . . . . . . . . . . . . . . 3-32 editing with cursor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]