User manual FURUNO FM-8800S Operators Manual

[. . . ] VHF RADIOTELEPHONE FM-8800D/8800S Your Local Agent/Dealer 9-52 Ashihara-cho, Nishinomiya 662-8580, JAPAN Telephone : Fax : 0798-65-2111 0798-65-4200 All rights reserved. Printed in Japan FIRST EDITION : SEP. OME-56420 ( TATA ) FM-8800D/S *00014993000* *00014993000* *00014993000* *OME56420A30* *OME56420A30* *OME56420A30* CANCELING DISTRESS ALERT If less than three seconds has elapsed since the [DISTRESS] key was pressed, the distress alert may be canceled by pressing the [CANCEL] key. Switch equipment on and set to Channel 16. Transmit message to "All Stations" giving your vessel's name, callsign and DSC number to cancel the distress alert. [. . . ] DSC OPERATION FOR NON-DISTRESS CASES 2) Sending automatic acknowledge (ACK BQ) with comply status "UNABLE. " 1. When the automatic acknowledge feature is active (AUTO ACK), the comply status is "UNABLE" and a coast or ship call is received, the display shown below appears, indicating that the auto acknowledge call with UNABLE (ACK BQ) has been sent. The alarm sounds and the ALARM LED blinks two minutes. Unable acknowledge transmitted. ROUTINE TCmd1 : UNABLE TCmd2 : BUSY CH : NO INFO CANCEL ALARM 2. Press the CANCEL key to silence the alarm. The following display appears. ** Send Message ** COAST ACK TO : 003456789 ROUTINE TCmd1 : UNABLE TCmd2 : BUSY CH : NO INFO PRESS ENT 3. If you want to send a proposal, prepare a message and sent it following the procedures shown on in paragraph 3. 1. 1. 3-7 3. DSC OPERATION FOR NON-DISTRESS CASES 3) Manually acknowledging individual call with "ABLE. " 1. When the equipment is set up with manual acknowledge (MANUAL ACK), the comply status is "ABLE" and a coast or ship call is received, the alarm sounds and the display looks like the one below. Individual request call received. FROM : 123456789 ROUTINE TCmd1 : SIMPLEX TP TCmd2 : NO INFO CH : 08 CANCEL ALARM 2. Press the CANCEL key to silence the alarm. The following display appears. ** Received Message ** APR01/ 04 12 : 34 ECC : OK SHIP CALL FROM : 123456789 ROUTINE TCmd1 : SIMPLEX TP TCmd2 : NO INFO CH : 08 PRESS ENT TO ACK. 3. To send the ACK BQ manually, press the ENT key. The pop-up window shown below is displayed. ABLE UNABLE 3-8 3. DSC OPERATION FOR NON-DISTRESS CASES 4. The display changes as shown below. ** Send Message ** SHIP ACK TO : 123456789 ROUTINE TCmd1 : SIMPLEX TP TCmd2 : NO INFO CH : 08 PRESS CALL TO SEND 5. Press the CALL key more than three seconds to transmit the ACK BQ. The display changes to the standby display with a channel specified. 4) Manually acknowledging a coast or ship call with "UNABLE. " 1. When the equipment is set up with manual acknowledge and an individual call is received, the alarm sounds and the display shows the message "Individual request call received. " Individual request call received. FROM : 123456789 ROUTINE TCmd1 : SIMPLEX TP TCmd2 : NO INFO CH : 08 CANCEL ALARM 2. Press the CANCEL key to silence the alarm. [. . . ] Number of satllite in use, 00-12, may be different from the number in view 6. Antenna altitude above/below mean sealevel, m 8. Differential reference station ID, 0000-1023 11. Checksum NOTE 0 = fix not available or invalid 1 = GPS SPS mode, fix valid 2 = differential GPS, SPS mode, fix valid 3 = GPS PPS mode, fix valid 4 = Real Time Kinetic. [. . . ]