User manual FURUNO FS-1570

[. . . ] SSB RADIOTELEPHONE FS-1570 (150 W) FS-2570 (250 W) The paper used in this manual is elemental chlorine free. FURUNO Authorized Distributor/Dealer 9-52 Ashihara-cho, Nishinomiya 662-8580, JAPAN Telephone : Fax : 0798-65-2111 0798-65-4200 All rights reserved. Printed in Japan FIRST EDITION : OCT. OME-56360 ( YOSH ) FS-1570/2570 *00080933802* *00080933802* *00080933802* *OME56360E30* *OME56360E30* *OME56360E30* Distress Alert Calling Procedure Below is the procedure for transmitting a distress alert via radiotelephone. Transmit the distress alert when a life-endangering situation occurs on your vessel. Open the DISTRESS button cover and press the [DISTRESS] button more than three seconds to show the following display, then release the [DISTRESS] button. Distress call in progress! NATURE: UNDESIGNATED POS: 12°34N 123°45E AT 12:34 TELEPHONE 2182. 0 KHZ DSC FREQ : TIME TO GO : 2187. 5 KHZ 30S 2. [. . . ] After the call has been sent, the following display appears. Waiting for pos acknowledgment. FROM SHIP : ROUTINE DSC FREQ : TIME TO GO: 123456789 2177. 0 KHZ 4M30S 12. Try calling again?" appears after the time has counted down to zero, meaning there was no response from the party called. ) Pos acknowledge call received. FROM SHIP : 123456789 ROUTINE 12°34N 123°45E AT 12:34 POS : STOP ALARM No response!Try calling again? FROM SHIP : ROUTINE DSC FREQ : 123456789 2177. 0 KHZ CALL AGAIN Position acknowledge call received No response 5-35 5 CALLING, RECEIVING 13. Do one of the following depending on the message displayed at step 12. Acknowledge call received The audio alarm sounds; press the [CANCEL] key to silence the alarm. You can now confirm position of other ship. MAR-23-2002-23:59 * Received message * OK ECC: POSITION ACKNOWLEDGE 123456789 FROM SHIP : ROUTINE 12°34N 123°45E AT 12:34 POS : GO TO ALL VIEW No response!Re-send call: Push the [ENTER] knob followed by the [CALL] key. Cancel call: Press the [CANCEL] key. 5. 8. 2 Position call: other ship requests your position You may turn automatic acknowledge of position request on or off with POSITION CALL in the AUTO ACK menu. When another ship requests your position and the status of the [5/ ACK/SQ] key is AUTO ACK and the setting of POSITION CALL on the Auto ack menu is ON, the FS-1570/2570 transmits own position data (transmission time: approx. 7 sec. ), showing the display below. Position auto acknowledge call in progress! TO SHIP : 123456789 ROUTINE POS: 35°30N 135°30E AT 23:54 DSC FREQ : 2177. 0 KHZ TIME TO GO : 7S 2. After the call is sent the audio alarm sounds and the display below appears. Position auto acknowledge call transmitted. TO SHIP: 123456789 ROUTINE POS: 35°30N 135°30E AT 23:54 STOP ALARM 5-36 5 CALLING, RECEIVING 3. Press the [CANCEL] key to silence the alarm, and the display changes as below. ** Xmitted message ** MAR-23-2002-23:59:09 POSITION ACKNOWLEDGE TO SHIP : 987654321 ROUTINE POS : 35°00N 135°00E AT 23:59 GO TO ALL VIEW 4. Press the [CANCEL] key to return to the DSC standby screen. When a position request call is received and the status of the [5/ ACK/SQ] key is MANUAL ACK, the audio alarm sounds and the display changes as below. Position request call received. FROM SHIP: ROUTINE 123456789 STOP ALARM 2. Press the [CANCEL] key to silence the alarm. The display changes as below. MAR-23-2002-23:00:01 * Received message *OK ECC: POSITION REQUEST FROM SHIP : 123456789 ROUTINE ANSWER! " ALL VIEW 3. To send your ship's position, rotate the [ENTER] knob to choose ANSWER and then push the [ENTER] knob. Your display should now look something like the one below. ** Compose message ** CALL TYPE: POSITION ACKNOWLEDGEMENT POSITION: 35 00N 135 00E AT 23:01 DSC FREQ : 2M-INTL GO TO ALL VIEW 5-37 5 CALLING, RECEIVING 4. Confirm the position shown and then press the [CALL] to send the position data call (transmission time: approx. The display changes as below. Pos acknowledge call in progress! TO SHIP : 123456789 ROUTINE POS: 35°00N 135°00E AT 23:01 DSC FREQ : TIME TO GO: 2177. 0 KHZ 7S 5. The DSC standby screen automatically appears after the call is sent. 5. 9 PSTN Call The PSTN call allows the making and receiving of telephone calls over public switched telephone networks. To use the PSTN call feature, use a handset which has a HOOK ON/OFF function. The standard supply handset has this feature. 5. 9. 1 Sending a PSTN call, receiving acknowledge back (ACK BQ) 1. [. . . ] 7-3 PSTN call charge information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-43 receiving. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-42 sending. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-38 R RF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]