User manual FURUNO IF-5200 OPERATORS MANUAL

[. . . ] V HF INT E R F A C E VHFC" ^·[ t FCX IF -5200 TABLE OF CONTENTS VHF INTERFACE IF-5200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Example of connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Audio level adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Jumper setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Packing List OUTLINE DRAWING INTERCONNECTION DIAGRAMS 1 : : 116 ± 0. 5 4- 5 FIXING HOLES #50 176 ± 0. 5 217 148 #50 NAMEPLATE 94 2 IF-5200 FM-8700 CN3 CN1 CN2 FM10PS-6H DC24V TTYCS-1 VR-5000 VHF1 VHF2 HANDSET * CC490, 1m * CN4 OUT1** OUT2** * * TTYCS-1 TTYCS-1 WING HANDSET CN7 CN5 CN6 * CC491, 1m * CN9 CN8 TTYC-4S X2 **: OUT2 *: OUT1 3 4 VHF INTERFACE IF-5200 The VHF interface unit IF-5200 mixes VHF transmitting and receiving signals and output to the VDR. Specifications Power Supply: Mic input level: Factory default: 24 VDC (21. 6 to 31. 2 Vdc), 40 mA -16 to ­56 dBm, Input impedance: >10k ohms -46 dBm, 600 ohms: 10dB ATT ON (Changeable among 10, 20, 30 and 40 dB with DS1 and DS3. ) Speaker input level: Factory default: 32 to 200 ohms, 2 mW, input impedance: 10k ohms 2 mW, 200 ohms: 10dB ATT OFF (Changeable between 0 and 10 dB with DS2 and DS4. ) PTT Switch signal: Output: TTL level 0 dBm±10dB, 600 ohms, balanced Mounting Remove the cover to access holes. [. . . ] Set the DIP switch so that the audio output level between #4 and #5, or #7 and #8 of CN9 is 0 dBm (2. 2 Vp-p). Factory-setting: 10 dB (ON); 20 dB (OFF); 30 dB (OFF) and 40 dB (OFF). (Turn on one element of DIP switch for attenuation. ) DS1 CN9 Channel 1 Input (HANDSET1) JP1 DS2 #4 OUT #7 OUT2 DS3 Channel 2 Input (HANDSET2) DS4 To VDR Location of DIP switches and jumper wire in IF-5200 Table below lists the function of DS2 and DS4. DIP Switch 10 dB ATT MIX Function Attenuates speaker signal by 10 dB. Factory-setting: OFF When set to OFF, either "mic" or "sp" signal is sent to the VDR according to the PTT switch status. When ON, both "mic" and "sp" signals are always sent to the VDR. Factory-setting: OFF Jumper setting Jumper wire JP1 functions as follows: Short circuit (Factory-setting): "input" signals from CH1 and CH2 are output from OUT 1 port and OUT 2 port respectively Open circuit: "input" signals from CH1 and CH2 are combined and output from OUT 1 port. 7 A-1 Nov. 7, '02 D-1 1 2 3 S-1 A VHF VHF INTERFACE IF-5200 HANDSET HANGER HSC701K-B20 FM10PS-6H *2 CN3 0V PTT SW MIC-H MIC-C SP(H) THRU1 CN4 0V PTT SW MIC-H MIC-C SP(H) THRU1 THRU2 0V CN7/8 0V PTT SW MIC-H MIC-C SP(H) THRU1 THRU2 0V *2 1m FM10PS-6H 1 2 3 4 5 6 VHF VHF TRANSCEIVER UNIT FM-8500 HANDSET 0V PTT SW MIC-H MIC-C HS SP HOOK SW 1 2 3 4 5 6 1 2 3 4 5 6 7 8 CABLE ASSY. [. . . ] 21 '04 CHECKED APPROVED SCALE DWG. No. K. MIYAZAWA TAKAHASHI. T Takahashi T. MASS kg TITLE IF-5200 (W/FM-8700) VHF AUDIO INTERFACE INTERCONNECTION DIAGRAM NAME C4418-C03- E *00015032500* *00015032500* *OMC44181A00* *OMC44181A00* [. . . ]