User manual FURUNO MU-120C OPERATORS MANUAL

[. . . ] MULTI-PURPOSE LCD DISPLAY MU-120C SAFETY INSTRUCTIONS Safety Instructions for the Operator Safety Instructions for the Installer WARNING Do not open the equipment. Only qualified personnel should work inside the equipment. Do not disassemble or modify the equipment. Fire, electrical shock or serious injury can result. [. . . ] Also, DVI screen can be adjusted similarly. Press the [MENU] key to show the main menu. For VGA and XGA signals, FULL and NORMAL are available. Otherwise, unwanted image may appear outside of the display area. Note: When the characters are not clear, adjust PHASE and SHARPNESS. 8 3. 2 VIDEO Setting VIDEO1, VIDEO2 and VIDEO3 screens; that is, the picture-in-picture windows can be adjusted as below. Press [] or [] to select VIDEO1, VIDEO2 or VIDEO3 as appropriate. RGB1 RGB2 DVI VIDEO1 VIDE02 VIDE03 OSD SYSTEM PIP_SIZE CONTRAST R_LEVEL G_LEVEL B_LEVEL TEMPERATURE B STRETCH W STRETCH 5 (1 ­10) 44 (1 ­ 64) 31 (1-64) 31 (1-64) 31 (1 ­ 64) 7000K (5500K/6500K/7000K/8000K) OFF (OFF, 1 ­ 10) OFF (OFF, 1 ­ 10) VIDEO1 (2 or 3) setting menu 3. Press the [] or [] key to select the item to adjust. Menu item PIP_SIZE CONTRAST R_LEVEL G_LEVEL B_LEVEL TEMPERATURE B STRETCH W STRETCH Function Adjusts the size of picture-in-picture window. Available range 1(25 mmx18mm) 10 (160 mmx129mm) 1-64 1-64 1-64 1-64 5500K/6500K/7000K/8000K OFF, 1-10 OFF, 1-10 Picture-in-picture window Picture-in-picture window 9 3. 3 Menu Window Setting 3. 3. 1 Adjusting the menu window The menu window can be moved and translucentized on the OSD (On Screen Display) menu. Press the [] or [] key to select OSD. RGB1 RGB2 DVI VIDEO1 VIDE02 VIDE03 OSD SYSTEM H_POSITION V_POSITION TRANSLUCENT 12 (1 ­ 22) 23 (1 ­ 23) OFF (OFF/ON) CUSTOM NAME RGB1 = RGB1______ RGB2 = RGB2______ DVI = DVI_______ VIDEO1 = VIDEO1____ VIDEO2 = VIDEO2____ VIDEO3 = VIDEO3____ OSD menu 3. Press [] or [] to select the menu item you want to adjust. Menu item H_POSITION V_POSITION TRANSLUCENT CUSTOM NAME Function Moves the menu window horizontally. Available range 1-22 (1: left, 22: right) 1-23 (1: up, 23: down) Off, On 10 3. 3. 2 Changing the signal name You can change the signal name which is shown on the DISP or PIP menu, described in the next chapter. It is useful to use the name of the device connected (ex. For detailed information about these menus, see Chapter 4. Press the [MENU] key to show the main menu. Press the [] key to choose the OSD menu. RGB1 RGB2 DVI VIDEO1 VIDE02 VIDE03 OSD H_POSITION V_POSITION TRANSLUCENT CUSTOM NAME RGB1 = RGB1______ RGB2 = RGB2______ DVI = DVI_______ VIDEO1 = VIDEO1____ VIDEO2 = VIDEO2____ VIDEO3 = VIDEO3____ 25 (1 - 50) 21 (1- 50) OFF (ON/OFF) OSD menu 3. Press the [] or [] key to select the signal to change its name in CUSTOM NAME area. Press the [] key to select the character you want to change. In the example below, "G" is selected. CUSTOM NAME RGB1 = ______ RGB1 = ______ RGB2 = ______ RGB2 = ______ DVI = ______ DVI = ______ 5. Press the [] or [] key to select appropriate alphanumeric character. [. . . ] Change paper frequently so the salt or dirt will not scratch the LCD. Do not use solvents such as thinner, acetone or benzene for cleaning. Fuse replacement The 7 A fuse in the power cable protects the equipment from internal fault and overcurrent. If the fuse blows, find the cause before replacing it. If the fuse blows again after replacement, request service. WARNING Use the proper fuse. [. . . ]