User manual FURUNO SC-60 OPERATORS MANUAL

[. . . ] SATELLITE COMPASS SC-60 Your Local Agent/Dealer 9-52 Ashihara-cho, Nishinomiya, Japan Telephone : fax : 0798-65-2111 0798-65-4200 All rights reserved. Printed in Japan FIRST EDITION : FEB. OME-72480 ( KAMI ) SC-60 *00080919106* *00080919106* *00080919106* *OME72480U10* *OME72480U10* *OME72480U10* SAFETY INSTRUCTIONS Safety Instructions for the Operator Safety Instructions for the Installer WARNING Do not open the equipment. Only qualified personnel should work inside the equipment. Do not disassemble or modify the equipment. [. . . ] Choose I/O SETUP and press the [ENT] key. Choose NMEA VER and press the [ENT] key. VER1. 5 VER2. 0 IEC Format selection window 4. Choose VER 1. 5, VER 2. 0 or IEC as appropriate and press the [ENT] key. 3-9 3. OPERATION 3. 8. 4 Log pulse This equipment provides SOG (speed over ground) in high accuracy. It converts an SOG value to a closure signal and outputs at the rate of 200 or 400 pulses/nm. Choose I/O SETUP and press the [ENT] key. Choose LOG PULSE and press the [ENT] key. 200p/nm 400p/nm Log pulse rate selection window 4. Choose 200 p/nm or 400 p/nm as appropriate and press the [ENT] key. Press the [DISP] key to close the menu. 3. 8. 5 Talker identifier mnemonics Choose the heading talker ID for the output data sentence HDT and HDM as follows: 1. Choose I/O SETUP and press the [ENT] key. Choose HDG TALKER ID and press the [ENT] key. GP HE HN HC Heading talker selection window 4. Choose GP, HE, HN or HC as appropriate and press the [ENT] key. If an external gyrocompass is to be used, choose HC. GP: GPS Navigator HE: North-seeking gyrocompass HN: Non-north seeking gyrocompass HC: Gyrocompass 5. Press the [DISP] key to close the menu. 3-10 3. OPERATION 3. 9 3. 9. 1 System Setup Geodetic data Your unit is preprogrammed to recognize most of the major chart systems of the world. Although the WGS-84 system (default setting) is the GPS standard, other categories of charts in other datum still exist. Match the GPS datum with the chart system. Choose SYS SETUP and press the [ENT] key. SYSTEM SETUP DATUM : WGS84 UNITS : kt TIME DIFF : +00:00 TIME DISP : 24 HOUR TEST?DEMO : OFF EXCHANGE BATTERY? SYSTEM SETUP menu 3. Confirm that the cursor is selecting DATUM and press the [ENT] key. Choose WGS84 (GPS standard), WGS72 or OTHER according to the nautical chart you use and press the [ENT] key. [. . . ] 4-5 cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 fuse replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 Menu tree. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 N Nav data display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 Nav out menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]