User manual GAGGENAU CI 482

[. . . ] Table of contents Important information . 74 74 76 78 79 79 80 80 81 82 82 83 84 85 86 87 87 88 Familiarising yourself with the appliance . 78 Twist pad with removable twist knob . 81 Main switch with child proof lock . [. . . ] The Powerboost function will always be available whenthe other hotplate of the same group is not switched on. (See diagram) For example, if you want to activate this function in hotplate 1, number 2 (situated behind it) should be switched off, and vice versa. If the zone referred to is not switched off, the letter x will appear alternately on the indicator for that hotplate, as well as the power level that has been selected. The Powerboost function will have deactivated and it will return to power level previously selected. 89 How to activate it The hotplate must be connected. 1. Select the hotplate desired using the control knob. Select the heat level with the control knob. Press the sensor , and the letter x will appear on the display. This is how to deactivate it Follow these steps: 1. Select the hotplate desired with the control knob. The letter x will disappear d Timer function from the display. In certain circumstances, the Powerboost function may be deactivated automatically to protect the internal electronic components of the hob. This function can be used in two different ways: - to switch a hotplate off automatically - as a cooking timer Setting a hotplate to switch off automatically Setting procedure Enter a specific duration for the desired hotplate. When the duration has elapsed, the hotplate switches off automatically. Use the twist knob to select the hotplate. 90 2. Use the twist knob to set the required duration. The duration flashes for several seconds and then begins to count down. If you have set a duration for several hotplates, it is always the shortest duration that is displayed. When the duration has elapsed When the duration has elapsed, the hotplate switches off. 0 lights up in the heat setting indicator. The displays will go out and the audible signal will stop. Use the twist knob to select the hotplate. Touch the T symbol and change the duration using the twist knob. Select the hotplate using the twist knob, touch the T symbol and set to 00. The indicator goes out after a few seconds. If you would like to call up the remaining duration for a hotplate: Use the twist knob to select the hotplate. [. . . ] The fan may also run on once the hob has been switched off if the temperature it detects is still too high. The noises described are normal and part of the induction technology and do not indicate a fault. Low humming like a transformer Quiet whistling Crackling High pitched whistle Sporadic clicking Fan noise 100 Packaging and old appliances Disposing in an environmentally responsible manner Unpack the appliance and dispose of the packaging in an environmentally responsible manner. This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). This guideline is the frame of a European wide validity of return and recycling on Waste Electrical and Electronic Equipment. After sales service Our after sales service is there for you if your hob should need to be repaired. [. . . ]