User manual GAGGENAU CK 260

[. . . ] These will serve to ensure your personal safety and the lasting value of your appliance. You will find notes on Page 3 that you ought to observe before operating the appliance for the first time. The chapter entitled "Cleaning and care" will make sure that your appliance will stay operable and beautiful for a long time. And now we wish you lots of fun cooking. Fig. [. . . ] Do not remove the cooking vessel until you have switched off the hotplate. The size of pots and pans should correspond to the size of the hotplate. ­ Observe caution with oils and fats. Overheated oils and fats can easily cause fires (e. g. ­ Turn all control knobs to 0 after use. ­ In the event of malfunctions, first check your household fuses. If a problem has nothing to do with the power supply, please contact your specialist dealer or your responsible Gaggenau after-sales service. ­ Built-in temperature protection prevents overheating of the appliance and of build-in furniture. ­ Use of aluminium kitchenware or stainless steel kitchenware with aluminium bases may produce mother of pearl-coloured stains on your cooker. These will not have a detrimental effect on functioning of the cooking surface, though. ­ The glass-ceramic cooker additionally features an individual residual heat display. The residual heat display indicates that, after switching off, a cooking zone has still not cooled down to such an extent that it can be safely touched. It lights up in the residual heat display panel as a red dot for each cooking zone. Use the residual heat to warm up meals, for example. Structure and operating principle 2. 1 Structure 1 2 3 4 5 6 7 8 9 10 SuperQuick cooking zone Ø 145 mm (1200 W) SuperQuick cooking zone Ø 180 mm (1800 W) SuperQuick cooking zone Ø 145 mm (1200 W) Control knob for front right cooking zone Control knob for rear right cooking zone Operating indicator Display panel for residual heat Control knob for rear left cooking zone Control knob for front left cooking zone SuperQuick cooking zone Ø 180 mm (1800 W) 1 2 10 3 0 1 9 1 0 9 1 0 9 1 0 9 3 7 3 7 3 7 3 7 Fig. 2 9 8 7 65 4 2. 2 Operating principle Fig. 3 The glass-ceramic range features SuperQuick cooking zones. These cooking zones possess good heat distribution properties and light up red while heating up. The cooking zones are controlled electronically and are switched on and off during operation. This is done to protect the glass plate against overheating and to ensure a uniform supply of heat from the hotplate to the saucepan. The range features an individual residual heat display. It lights up in the residual heat display panel 8 as a red dot for each cooking zone. [. . . ] If you are not successful in remedying the fault with the aid of the list below, then contact your Gaggenau after-sales service. Fault Appliance cannot be switched on. The cooking zone no longer lights up bright red although you have not changed any switch settings. The food you are cooking needs a relatively long time to become hot. Possible cause Mains plug removed or domestic fuse has tripped. This mechanism protects the cooking surface against overheating and serves to keep the supply of heat even. [. . . ]