User manual GAGGENAU CK171614

[. . . ] Maintenance 5. 1 Overview 5. 2 Remedying slight malfunctions yourself 6. Assembly instructions 6. 1 Technical data 6. 2 Important notes on installation 6. 3 Installation Page 3-4 Page 3 Page 4 Page 4 Page 5 Page 5 Page 5 Page 5 Page 6-7 Page 6 Page 7 Page 8 Page 9 Page 9 Page 9 Page10-11 Page 10 Page 10 Page 11 1 Preface Cooking with your new glass-ceramic cooker will be even more fun than before. The appliance offers you the following advantages ­ Short warm-up time ­ Very good heat distribution To ensure that you will be able to use this appliance in all its diversity, read through the operating and assembly instructions conscientiously before operating it for the first time. The instructions contain important notes on use, installation and maintenance of the appliance. [. . . ] This will eliminate any 'newness' smells and soiling (see chapter "Cleaning and care"). Operation of the appliance must be discontinued immediately if improper use produces cracks, breaks or flaws on the cooking surface, with the result that live parts can come into contact directly or indirectly with seeping liquid or if there is a risk of injury. Remove the mains plug or actuate the corresponding mains fuse. Inform after-sales service! 1. 3 About use ­ The appliance is intended solely for use in the household and must not be put to any other uses. ­ Use the appliance to prepare meals only. It must not be used to heat up the room in which it is installed. ­ Do not use the cooking surface as space to store items. ­ Place a cooking vessel on the corresponding hotplate before operating it. Do not remove the cooking vessel until you have switched off the hotplate. The size of pots and pans should correspond to the size of the hotplate. ­ Observe caution with oils and fats. You can make use of residual heat in this way. 5 3. Operation 3. 1 Switching on / off Switching on 0 Switching on: Turn the corresponding control knob to the left or right to the required cooking level (1-9). Note: A few seconds after switching on, the individual residual heat display indicating the chosen cooking zone lights up in the residual heat display panel. Fig. 4 Switching off 0 Switching off: Turn the control knob to the 0 position on the left or right. Note: The control knobs for cooking zones with the combination function cannot be switched from the combination position directly to the 0 position. Fig. 5 Individual residual heat display The glass-ceramic cooker additionally features an individual residual heat display. It lights up in the residual heat display panel as a red dot for each cooking zone. The display of the residual heat indicates that, after switching off, a cooking zone has still not cooled down to such an extent that it can be safely touched. Fig. 6 6 3. 2 Operating with the combination function 0 Cooking zone 3 (rear right) has a combination function to turn the round cooking zone into an oval cooking zone, which is suitable for heating oval roasters. Cooking zone 4 (front right) has a combination function to turn the small round cooking zone into a large round cooking zone. Switching on the combination function: Turn the corresponding control knob to the right beyond 9 (EE 214, SP 212) or 12 (SP 384) to the or (Combination) symbol and then back to the cooking level you require. Fig. [. . . ] Do not use any abrasive or nitro polishing agents for cleaning!Please refer to the enclosed brochure for further notes on cleaning. Remove baked-in food remainders and coarse dirt with our small scraper (nr. : 087670). Clean the cooking surface regularly with the Gaggenau cooker cleaner (nr. : 098690). [. . . ]