User manual GAGGENAU VC 422

[. . . ] Operating and Assembly Instructions VC 421 VC 422 Glass Ceramic Electric Cooktop VC 421 VC 422 1. Important Notes For your safety Operating for the first time About use 2. Features Features VC 421 Features VC 422 Special accessories Visual signals 3. Operation VC 421 Switching on and off Indicator light / Residual heat display Cooking zone extension Holiday safeguard 4. [. . . ] Activating extension Turn either of the two corresponding control knobs to the right to the extension symbol. Now turn the other control knob left or right to the required position (1 -12). The selected cooking level is valid for both cooking zones and the additional zone. Three spots appear on the indicator display while the roaster zone is on. Note: do not use the roaster zone for heating up round pots or pans. Switching off Fully turn the control knob to the OFF position. After switching off the cooking zone the corresponding indicator light will flash, as long as the cooking zone has not cooled down sufficiently to be touched safely. Note: the extension will not be activated, when switching the cooking zone on again. Holiday safeguard (Automatic switch-off) The appliance is set to automatically switch off a cooking zone 4 hours after the last operation. The luminous disc behind the corresponding control knob flashes. Now the cooking zone can be switched on again as normal. 8 4. Operation VC 422 Switching on Switching on Press down the control knob for the corresponding cooking position and turn it left or right to the required position (1 -12). The luminous disc behind the control knob and the corresponding indicator light on the display panel light up, as long as the corresponding cooking zone is switched on. The cooking zones are electronically controlled during use, in order to maintain a constant heat, the cooking zone switches on and off intermittently. Switching off Switching off Fully turn the control knob to the OFF position. The luminous disc goes off. Indicator light / Residual heat display Indicator light / Residual heat display The corresponding indicator light on the display panel lights, as long as the corresponding cooking zone is switched on. After switching off the cooking zone the corresponding indicator light will flash, as long as the cooking zone has not cooled down sufficiently to be touched safely. 9 Activating extension Cooking zone extension The front cooking zone can be extended to a large diameter The rear cooking zone can be converted to an oval cooking zone especially suitable for oval roasters. Activating extension Turn the corresponding control knob to the right to the extension symbol. An audible signal is sounded and the extension is activated. Now turn the control knob further right to the required position (1 -12). T wo spots appear on the indicator display while the cooking zone is on. Note: do not use the roaster zone for heating up round pots or pans. Switching off Fully turn the control knob to the OFF position. After switching off the cooking zone the corresponding indicator light will flash, as long as the cooking zone has not cooled down sufficiently to be touched safely. Note: the extension will not be activated, when switching the cooking zone on again. Holiday safeguard (Automatic switch-off) The appliance is set to automatically switch off a cooking zone 4 hours after the last operation. The luminous disc behind the corresponding control knob flashes. [. . . ] The installation sketch contains the measurements of the space required for the trim between the appliances. Several appliances can also be installed in individual recesses, as long as a minimum clearance of 50 mm is kept to between the appliances. · As shown in the installation sketch, drill the Ø 35 mm holes to secure the control knobs in the cabinet front. min. 5 0 05 min. 1 , 5 62 max. 1 35 60 90 360 765 · If the cabinet front is thicker than 26 mm, the front must be routed from the back to max. [. . . ]