User manual GAGGENAU VP 421

[. . . ] Operating and Assembly Instructions VP 421 Teppan Yaki VP 421 1. Important Notes For your safety Operating for the first time About use 2. Features Features Special accessories Operating principle 3. Operation Switching on Switching off Residual heat display Keeping warm setting Holiday safeguard Visual signals Settings table 4. [. . . ] If the power supply is in proper working order, but the appliance is still not functioning, please inform your specialist dealer or your nearest Gaggenau after-sales service. 4 2. Features Features 1 Frying surface, hard-chrome plated 2 Control knob for selecting the frying zone: both heating zones selected only front heating zone selected only rear heating zone selected 1 3 Temperature control knob 2 spatulas are included to turn the food. 2 3 Special accessories You can order the following special accessory: VV 400-000 Connecting trim VZ 400-000 Connecting trim with timer VD 400-000 Appliance cover Teppan Yaki is an old Japanese tradition for grilling, frying and roasting. Preparing the food is an experience, the food is prepared ­ without pots or pans ­ directly on the frying surface. Use the included spatulas to turn the food and to remove food residues. The Teppan Yaki allows you to select the temperature that is best suited for the food. You can fry with little oil or fat on the smooth, hard-chrome plated surface, the food can be turned easily. The large frying area is ideally suitable for meat, fish, egg dishes, vegetables and sweet dishes. Operating principle 5 3. Never switch on the appliance with the cover closed (special accessory). Switching on Switching on Press down the left control knob and select the desired frying zone. You can select the whole frying zone, or only the front or rear part. Press down the right control knob and turn it left or right to the required temperature between 120 - 240 °C. The luminous disc behind the right control knob flashes until the appliance heats up. When the correct temperature has been reached, the luminous disc lights constantly. After heating up, coat the frying surface with a little oil or fat with the spatula or a heat-resistant brush (e. g. Put the food directly ­ without pots or pans ­ on the frying surface. Use the included spatulas to turn the food. Note: Do not hit the frying surface with the spatula. Switching off Fully turn the right control knob to the OFF position. Residual heat display After switching the right control knob to the OFF position, the luminous disc behind the control knob will flash until the appliance has cooled down sufficiently to be touched safely. The appliance must not be touched until the residual heat display has gone off!Do not close the cover (special accessory) until the appliance has cooled down completely! Switching off 6 Keeping warm setting Keeping warm setting Turn the right control knob to the keeping warm setting. [. . . ] Installation Technical data Total connected load: 220-240 V / 1 500 W Important notes on installation This appliance can be combined with all Gaggenau Vario 400 Series appliances. This appliance may be installed in kitchen combinations made of wood or similar combustible materials without taking additional safety measures. · As shown in the installation sketch, drill the Ø 35 mm holes to secure the control knobs in the cabinet front. · If the cabinet front is thicker than 26 mm, the front must be routed from the back to max. [. . . ]