User manual GAI-TRONICS 12576-502

[. . . ] 42004-732L2A GAI-TRONICS® CORPORATION A HUBBELL COMPANY Model 12576-502 Desktop Access Panel Confidentiality Notice This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics retains all intellectual property and other rights in or to the information contained herein, and such information may only be used in connection with the operation of your GAI-Tronics product or system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party. General Information Product Overview The Model 12576-502 Desktop Access Panel is a component of GAI-Tronics' ADVANCE system. The operation of each access panel is programmed at the ADVANCE system control cabinet. [. . . ] Separate the slide-in labels along the perforated lines on the sheet. Fold the tab at the end of the slide-in label so that it is perpendicular to the rest of the label. Slide the label into the appropriate slot opening located at the top of each of the button columns. Repeat the above steps for the remaining labels. To remove the keypad slide-in labels, proceed as follows: 1. Locate the tab at the top of the label and pull it out from behind. Slide the label out using the tab that has been exposed. f:\standard ioms - current release\42004 instr. manuals\42004-732l2a. doc 08/10 Model 12576-502 Desktop Access Panel Pub. 42004-732L2A Page: 8 of 11 Operation The access panel operator is capable of voice communication and system control functions. The following paragraphs provide a general overview of the available access panel features. Operation details for the access panel are determined by software programming at the ADVANCE system control cabinet. In general, the access panel handset is used for paging and party line communication. Push-button switches are used for a variety of system control functions. Push-Button Switch Summary Each push-button switch function and LED indicator (next to the switch) is programmable. Typical switch functions include alarm activation/reset, paging zone selection, or beacon activation/reset, but other special functions are available through system programming. Paging and Party Line Operation (typical) Complete the following steps to make a page announcement from an access panel. Select the desired paging destination(s) or all call. The LEDs of the selected switches illuminate. Press and hold the handset pressbar switch. After the short "wait" tone is heard, speak directly into the microphone to broadcast your announcement. Release the handset pressbar when complete. Upon releasing the pressbar switch, the access panel handset is connected to party line 1. [. . . ] 0. 775 Vrms (0 dBm) Speaker Amplifier Output level (with 1. 5 Vrms on Page/Party® system). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1. 5 watts Frequency response. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250­6500 Hz, +0/-3 dB ref to 1 kHz Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <1. 0% THD @ 1 kHz Mechanical Unit dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]