User manual GAI-TRONICS COMMANDPLUS DESKTOP CONSOLE

[. . . ] 43004-016E GAI-TRONICS® CORPORATION A HUBBELL COMPANY CommandPLUS Series Desktop Console Operator's Manual GAI-Tronics Corporation 400 E. Mohnton, PA 19540 USA 610-777-1374 800-492-1212 Fax: 610-796-5954 VISIT WWW. GAI-TRONICS. COM FOR PRODUCT LITERATURE AND MANUALS CONFIDENTIALITY NOTICE This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive business and technical information which is confidential and proprietary to GAI-Tronics. GAI-Tronics retains all intellectual property and other rights in or to the information contained herein, and such information may only be used in connection with the operation of your GAI-Tronics product or system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party. [. . . ] If a group is stacked in the page, as described previously, the individual aliases are displayed as they are transmitted. A group page, however, counts as one entry in the stack. If any page in the stack has a talk time programmed, the longest talk time is used for the talk time. Upon completion of all pages, "TALK NOW" flashes at the upper right of the display if a talk time has been programmed for any of the transmitted aliases. During this time, the microphone is active and voice audio is transmitted over the channel(s). To extend the talk time, press and hold the main TRANSMIT or the TX button on any transmitting channel. When the talk time is over, the operator releases the appropriate transmit button or if no talk time has been programmed, the console exits paging mode, returns to normal operation and selects the previously selected channel. As discussed earlier, the operator should exercise caution when following a page with a voice transmission to ensure that the correct channel is selected. The pages of the stack are kept until the console is reset. Therefore, to repeat a stack page, simply reenter paging and begin stacking the pages. As they are stacked, each page that was stacked previously is displayed as long as no other pages have been transmitted. All that is required is to press the LOCK+TRANSMIT key combination to confirm the stacking of each page. No reselection or reentry of pages is required. 25 12/10 Standard Operation CommandPLUS Series Desktop Console Operator's Manual Alert Page It is possible to send out an individual, group or stack page followed by an alert tone. To generate an alert page, select the page or pages to be transmitted. Press and hold the ALRERT button instead of the TRANSMIT button. The console generates the page(s) and approximately one second after the last page, begins the generation of the alert tone. The alert can be generated for up to eight seconds as long as the alert tone button is held. Upon releasing the alert tone button or at the end of the alert tone, the console will flash "TALK NOW" at the upper right of the display for a minimum of two seconds. During this time, the microphone is active and voice audio is transmitted over the channel(s). To extend the talk time, press and hold the main TRANSMIT or the TX button on any transmitting channel. When the operator releases the appropriate transmit button or the two seconds time out, the console exits paging mode, returns to normal operation and selects the previously selected channel. As discussed earlier, the operator should exercise caution when following a page with a voice transmission to ensure that the correct channel is selected. Intermediate DTMF Paging Immediate DTMF Paging is slightly different from the other paging formats in that there are no limits on the number of digits that can be transmitted and there are no preset aliases available. [. . . ] Display Brightness Menu Service Diagnostics The Service Diagnostics mode is used in servicing the unit and should only be used by a service technician. If you enter this mode, press the MODE button to return to the main console menu. SERVICE DIAGNOSTIC 1) FRONT PANEL DIAGNOSTICS 2) AUDIO DIAGNOSTICS 3) INTERNAL DIAGNOSTICS <1-6> TO SELECT 12:22:19PM 4) ALERT LEVEL 5) PAGE LEVEL 6) SECURITY <MODE> TO EXIT MAY-12-07 VU Figure 17. Service Diagnostics Main Menu 12/10 50 Definitions and Acronyms Term Definition CARD Suite Software Channel Channel Alias Name CSQ CTCSS GAI-Tronics' radio configuration software application for a personal computer. It is used to program and change the operating characteristics (features and options) of the CommandPLUS Series Desktop Console and some other GAI-Tronics products. [. . . ]