User manual GAMES NINTENDO SUPER NES SUPER MARIO WORLD

[. . . ] note Be sure to hook up the system with the mains lead unplugged from the mains. Hooking up the system with the mains lead plugged in may cause the system to malfunction. The system cable is used to send signals and electricity between the components for interlinked operation. Be sure to insert the connector horizontally until it clicks into place. [. . . ] Turn FUNCTION until "CD" appears. You can make an analogue recording a radio programme on a tape. You can use TYPE I (normal) or TYPE II (CrO2) tape. Press H on the tape deck to record starting from the front side. to record from the reverse side , press h on the tape deck. Press DIRECTION repeatedly until g appears to record on one side or h (or j) to record on both sides. When you start recording from the reverse side, the recording stops at the end of the reverse side even though you select h. When you want to reduce the hiss noise in highfrequency signals recorded at low level, press DOLBY NR after step 5 so "DOLBY NR" appears in the display. Turning DOLBY NR on reduces the noise when playing back these types of signals. Preset number and frequency (or station name* or RDS station name**) * The station name appears only if you have labelled the station (see page 27). If noise is heard while recording an AM radio programme, move the AM loop aerial to reduce the noise or connect a ground wire to the U terminal (see page 36). You can use Sleep Timer, even if you have not set the clock. â· The optional MD deck MDS-SP55 also automatically turns off after the MD finishes playing if you select "SLEEP AUTO". When Sleep Timer is used, you cannot use other timer functions. â· Do not set to "SLEEP AUTO" during Synchro Recording on a tape or an MD with the optional MD deck MDS-SP55. Each time you press the button, the minute display (the turn-off time) changes as follows: t SLEEP OFF t SLEEP AUTO* 10min T . t 80min T 90min T * The system automatically turns off in 100 minutes, or after the current CD or tape finishes playing. You can wake up to music at a preset time. Make sure you have set the clock (see page 8). To wake up to the radio, preset the radio stations first (see page 24). Or > repeatedly to set the hour, then press ENTER/YES. Set the time to stop play following the procedure in step 5. [. . . ] Keep pressing lm or press lm repeatedly on the CD player to return to the desired playing position. A stereo FM programme cannot be received in stereo. Turn on the power again, and close the cassette tray. Cover the broken tab with adhesive tape (see page 38). [. . . ]