User manual GAMES PC AZRAEL S TEAR

[. . . ] 2 Disk Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 DOS Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Windows® 95 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Removing AZRAEL S TEARTM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] You can change this string and other modem settings by editing the SERIAL. CFG file in the directory where you installed AZRAEL S TEAR. SERIAL PROBLEMS SERIAL Ë CONNECTIONS UNDER WINDOWS 95 Make sure that the serial ports on both machines are set to the same baud rate. To check the baud rate for you serial port, select the System icon from the Control Panel. Click the Device Manager tab and double-click the Ports (COM & LPT). Highlight the port you are using to make a connection, then click the Properties button. The Bits per second: number is displayed. We suggest using a setting of 9600, but you should try other settings to find the best rate for your system. 10 AZRAEL S TEAR REFERENCE CARD GENERAL TROUBLESHOOTING I CAN'T GET AZRAEL S TEAR TO INSTALL ONTO MY HARD DRIVE Ë Do you have enough free hard drive space?You need 20 MB for a minimum install, and 60 MB for a full one, assuming you don't have any disk compression systems running. If you do, well you can just about double the amount of space you need (to 60 MB for minimum install and 110 MB for the full). And maybe you could think about not using a disk compression system with AZRAEL S TEAR-it's under enough pressure as it is. STILL DOESN'T RUN AZRAEL S TEAR Ë View the README. TXT file in the root directory of the CD-ROM. You can do this by typing type readme. txt |more e. Check the Last-Minute-Things-To-Go-Wrong section for any additional information. SYSTEM-SPECIFIC ISSUES COMPAQ SYSTEMS Users who have a standard Compaq PC with a manufacturer-installed sound card may need to add some important parameters to one of the startup files in order to get sound with this program. Booting your computer with a DOS boot disk does not prevent you from accessing your hard drive, it merely provides a different method for configuring your memory. After you create a DOS boot disk, you will copy your CONFIG. SYS and AUTOEXEC. BAT files from your hard disk onto the boot disk and modify these copies. We recommend using this procedure to avoid altering the CONFIG. SYS and AUTOEXEC. BAT files on your hard drive, which may affect your memory configuration for running other applications. Below are instructions for creating a DOS boot disk. NOTE: To create a DOS boot disk you must use a disk that will fit in your A: drive. Your computer will not boot from the boot disk if it is inserted in the B: drive. From the DOS prompt, type C: and press e. È You will be prompted to insert a blank disk into drive A:. Do so if you haven't already, and press e. Once the disk is finished formatting, you will be asked to label (name) the disk. Type in a name and press e or simply press e for no name. [. . . ] Insert the game CD-ROM into the CD drive. (If it doesn't, select My Computer. Then, double-leftclick on the CD icon, and then on AUTORUN. EXE. ) 2. (This runs AR32E301. EXE, located in the EDOCS directory on the CD. ) 3. [. . . ]