User manual GAMES PC F19 STEALTH FIGHTER KEYBOARD OVERLAY

[. . . ] Keep your sales (till) receipt, which is your guarantee. Before you can use the handset to make calls you'll need to fit and fully charge the batteries, as described on pages 5 and 6. Please read the notes on page 4 before you install the base unit. E:\Binatone2005\iDECT_F19 STEALTH FIGHTER KEYBOARD OVERLAY\iDECT_F19 STEALTH FIGHTER KEYBOARD OVERLAY_UK_draft02a. vp 25 August 2005 16:47:28 Color profile: Generic CMYK printer profile Composite Default screen Where to find it /Caller Display (CID) button Press during a call to increase the volume in the earpiece. Press while using Menu functions to move through the options. [. . . ] When the other handset user answers, you can speak to her/him. If the other user does not answer, you can get back to the outside call at any time by pressing and holding the INT/# button again. To end the conference 3 2 Press the HANG UP button to hang up and transfer the call If you prefer, you can press HANG UP to transfer the outside call before the other handset answers your intercom call. If the user hasn't answered after 30 seconds, the outside call will come back to you and your handset will ring. Press the Ø button for one second è You stay connected to the outside call and the intercom call is put on hold. Provided the other user hasn't hung up, you can bring her/him back into the conference by pressing the Ø button again. OR, to drop out of the conference call, leaving the other user connected to the outside call: Press the HANG UP button 24 Help Line: 0845 345 9677 (Local Call rate) 25 E:\Binatone2005\iDECT_F19 STEALTH FIGHTER KEYBOARD OVERLAY\iDECT_F19 STEALTH FIGHTER KEYBOARD OVERLAY_UK_draft02a. vp 25 August 2005 16:47:46 Color profile: Generic CMYK printer profile Composite Default screen Using a multi-handset system Handset registration New Call tone When you are on an intercom call and an outside call comes in, you'll hear New Call tone to tell you that someone is calling you. To answer the outside call and end the intercom call: Press the R button briefly OR, to answer the outside call and put the intercom call on hold (so you can later use shuttle, conference or transfer): Press the INT/# button for one second If you now want to set up a three-way conference, simply press and hold the the Ø button for one second. To register a new handset to your base 1 unit The handset(s) supplied with your iDECT F19 STEALTH FIGHTER KEYBOARD OVERLAY base unit are already registered to it, so you don't need to register them. But if you've bought extra handsets separately, you'll need to register them. Each iDECT F19 STEALTH FIGHTER KEYBOARD OVERLAY handset can be registered to up to four base units. Make sure the handset you're registering is in standby mode. Use the â or á button to go to the language you want The options are ENGLISH, GERMAN, FRENCH or NEDERLANDS 2 3 Press the PHONE/OK button to select the language The default settings for the handset are: Ringer volume level -- 3 Ringer melody -- 3 Earpiece volume level -- 3 Speakerphone volume level -- 3 Key beep -- ON Battery Low tone -- ON Auto-answer -- OFF Handset PIN -- 0000 Baby Mode -- OFF Baby Number -- none Handset name -- HANDSET Language -- ENGLISH To return all handset settings to their defaults: 1 Auto-answer Normally, when there's an incoming call, you need to press a button on the handset to answer it. With auto-answer turned on, if a call comes in when the handset is in place on the base unit or charger pod, you can answer the call by simply lifting the handset. Select the DEFAULT SETTING option è The display shows CONFIRM DEFAULT SETTING? 2 Press the PHONE/OK button to confirm, or the HANG UP button to cancel è The display shows DEFAULT SETTING DONE 32 Help Line: 0845 345 9677 (Local Call rate) 33 E:\Binatone2005\iDECT_F19 STEALTH FIGHTER KEYBOARD OVERLAY\iDECT_F19 STEALTH FIGHTER KEYBOARD OVERLAY_UK_draft02a. vp 25 August 2005 16:47:47 Color profile: Generic CMYK printer profile Composite Default screen Handset settings Handset settings Registration Handset PIN See page 27. The default PIN (personal identity number, or security code) for the handset is 0000. If you want to protect your handset's settings, you can change the PIN to any four-digit number you'll easily remember. Once you've changed it, you'll be asked for it every time you go into the HANDSET SETTING menu. To change the PIN: Baby Call With Baby Call (babysitter's call) turned on, the handset will automatically dial a specified number when any button (except MENU) is pressed. Before you can turn Baby Call on, you must set (programme) the Baby Call phone number to be dialled. ! To set or change the Baby Call number With Baby Call turned on, the iDECT F19 STEALTH FIGHTER KEYBOARD OVERLAY handset can't be used for calling Emergency Services. Make sure there's an alternative phone available for emergencies. Select the BABY CALL NUMBER option è The display shows ENTER BABY NUMBER * Key in the phone number then press the PHONE/OK è The display goes back to standby mode. 1 2 Select the CHANGE PIN option è The display shows ENTER NEW PIN * Key in your chosen new PIN then press the PHONE/OK è The display shows CONFIRM NEW PIN * Key in your new PIN again then press the PHONE/OK è The display goes back to standby mode. If the PINs you key in at steps 2 and 3 don't match, you'll hear an error tone, and you'll need to try again from the beginning. If you want to turn PIN protection off, follow the steps above to change the PIN back to 0000. [. . . ] Disconnect the base unit from the telephone line and plug a different phone into the master telephone socket. If the call does not work, and you are using a two-way socket adapter, remove it and plug a telephone directly into the socket. If the call now works, the adapter may be faulty. If you cannot make a call, the fault may be on the exchange line. [. . . ]