User manual GARMIN BARKLIMITER DELUXE

[. . . ] Garmin, the Garmin logo, and TracBack are trademarks of Garmin Ltd. ?or its subsidiaries, registered in the USA and other countries. ?ANT?+?, BaseCamp?, chirp?, f?nix?, Garmin Connect?, GSC?, and tempe?These trademarks may not be used without the express permission of Garmin. ? [. . . ] Recurring alert: A recurring alert notifies you every time the device records a specified value or interval. ?For example, you can set the device to alert you every 30minutes. ? Alert Name Alert Type Proximity Distance Time Elevation Recurring Event, recurring Event, recurring Description See page7. ?You can set an interval or a custom distance from your final destination. ?You can set an interval or a custom time from your estimated time of arrival. ? Viewing Satellite Information The satellite page shows your current location, GPS accuracy, satellite locations, and signal strength. ?5 Select to view additional information. ? Simulating a Location When you are planning routes or activities in a different area, you can turn off GPS and simulate a different location. ?2 Select Setup > System > GPS Mode > Demo Mode. ?4 Select Go > Move to Location. ? Event, range, You can set minimum and maximum recurring elevation values. ?You can also set the device to alert you when you ascend or descend a specified amount. ?You can set alerts for reaching waypoints and the final destination of a track or route. ?You can set minimum and maximum speed values. ?You can set minimum and maximum pace values. ?You can customize the appearance of the time page (page9). ?You can change the units of measure for data such as distance, elevation, and temperature (page9). ? Map Tracks Time Units System Settings Select Setup > System. ?GPS Mode: Sets the GPS to Normal, UltraTrac (page8), Indoor, or Demo Mode (GPS off). ?WAAS: Sets the device to use Wide Area Augmentation System (WAAS) GPS signals. ?For information about WAAS, go to www. garmin. com/?aboutGPS?/?waas?. html. ?Hot Keys: Allows you to customize the hold function of the arrow keys (page8). ?Language: Sets the text language on the device. ?NOTE: Changing the text language does not change the language of user-entered data or map data. ? Pos. ?Format You can change how your position data appears (page9). ?Profiles Fitness You can change the active profile and edit your profiles (page2). ?You can turn on Auto Lap, customize your fitness user profile, and edit your heart rate zones (page9). ? Geocaches You can customize how your geocaches are listed and activate chirp (page10). ? [. . . ] TURN: The angle of difference (in degrees) between the bearing to your destination and your current course. ?You must be navigating for this data to appear. ? VERT SPEED (vertical speed): The rate of ascent or descent over time. ?VMG (velocity made good): The speed at which you are closing on a destination along a route. ?You must be navigating for this data to appear. ? Data Pages By default, these pages appear for the hiking profile. ? [. . . ]