User manual GARMIN BMW MOTORRAD NAVIGATOR III PLUS

[. . . ] BMW Motorrad Navigator III owner's manual Teile und Zubehör © 2007 Copyright by: BMW Motorrad and Garmin Ltd. or its subsidiaries This product has been developed for you by BMW Motorrad together with Garmin Ltd. If you have any questions regarding this product, please contact your BMW Motorrad dealer or BMW Motorrad directly. We hope you enjoy using your BMW Motorrad Navigator III. [. . . ] The number in the icon represents the delay time in minutes. The delay time is automatically calculated into the arrival time shown on the map. Traffic Map--displays the traffic incident on your current route. Color code Traffic symbol Traffic Codes and Symbols Green = Low severity; traffic is flowing normally. Yellow = Medium severity; traffic is a bit congested. Red = High severity; traffic is heavily congested. or. stopped. . Meaning Road. condition Road. construction Road. closed Slow traffic Accident Incident International North American Connecting the FM Traffic Receiver Plug the FM traffic receiver's cable into the mini-USB connector on the back of the Navigator III under the weather cap. To avoid traffic on your route: Information Traffic in Your Area From the Main menu, touch Tools > Traffic. Touch Near to view traffic at a different location. On the map, touch or > traffic incident > Detour Around. See page 23 for traffic settings. Adding a Subscription Touch Settings > Traffic > Subscriptions > Add Subscriptions. Follow the on-screen instructions. Navigator III Owner's Manual cUstoMizinG the naviGator iii cUstoMizinG the naviGator iii Volume From the Main menu, touch Volume or simply press and hold the SPEAK key. Touch and to adjust the volume of the speaker. Touch Mute, or press and hold the SPEAK key, to mute and unmute the Navigator III. Touch Settings to open the Audio Settings; see page 20. Touch Advanced to adjust the volume levels for the voice prompts in relation to the other audio output. General Settings GPS From the Main menu, touch Settings > General. Touch Settings > General > GPS, or touch the GPS Settings button on the GPS Info page. Use Indoors--touch Yes to turn the GPS receiver off and use the unit indoors. Set Position--if Use Indoors is selected, you can select a location on the map as your current location (position). Touch OK after you select your location. WAAS/EGNOS--disable and enable WAAS/ EGNOS. Wide Area Augmentation System (WAAS) and Euro Geostationary Navigation Overlay Service (EGNOS) are systems of satellites and ground stations that provide GPS signal corrections. To learn about WAAS and EGNOS, visit www. garmin. com/aboutGPS/ waas. html. Language Touch Settings > General > Language. Voice Language--change the language for all voice prompts and messages. Touch the voice you want to use, and touch OK. [. . . ] Click Manuals and then select Declaration of Conformity. naviGator iii troUBLeshootinG naviGator iii troUBLeshootinG Problem/Question The Navigator III does not acquire. satellite. signals. NOTE: The remote is optional in some Navigator III packages. My Bluetooth device will not connect to my Navigator III. Solution/Answer It can take a few minutes to acquire satellite signals. [. . . ]