User manual GARMIN EDGE 200

[. . . ] 2. Pull up the weather cap from the mini-USB port ➊. Installing the Edge For the best GPS reception, position the bike mount so the front of the Edge is oriented toward the sky. You can install the bike mount on the stem or the handlebars. 1. Select a suitable and secure location to mount the Edge where it does not interfere with safe operation of your bike. 2. Place the rubber disk ➊ on the back of the bike mount ➋. [. . . ] When the Edge memory is full, a message appears. The Edge does not automatically delete or overwrite your history. See page 9 to learn how to delete history. Upload your history (page 8) to Garmin Connect periodically to keep track of all of your ride data. History includes time, distance, calories, average speed, maximum speed, ascent and descent, and detailed lap information. note: History is not recorded while the timer is stopped or paused. Viewing History 1. Select History. 2. Select an option: • Last Ride • Longest Ride • Fastest Ride • All Rides • Odometer 3. Use ▲ and ▼ to scroll through your activities. note: To see lap data, select Options > Laps. Transferring History to Your Computer 1. Connect the USB cable to a USB port on your computer. 2. Pull up the weather cap from the mini-USB port ➊. 8 Edge 200 Owner’s Manual 3. Select Yes. Deleting History ➊ 3. Plug the small end of the USB cable into the mini-USB port. 5. Follow the on-screen instructions. After you have transferred your history to your computer, you may want to delete the history from your Edge. Select Options > Delete Ride. Viewing the Odometer Select History > Odometer to view the accumulated ride distance and time. Alerts Resetting the Odometer 1. Select History > Odometer > Reset. 2. Select an option: • Select Trip to reset current trip data • Select Reset All to reset all odometer data. Edge 200 Owner’s Manual You can use Edge alerts to train toward specific distance, time, and calorie goals. Using Distance, Time, and Calorie Alerts 1. Select Settings > Alerts. 4. Enter a time, distance, or calorie amount. 9 5. Go for a ride. Each time you reach the alert amount, the Edge beeps and displays a message. Auto Lap Using Auto Lap by Position You can use Auto Lap® to automatically mark the lap at a specific position. This feature is helpful for comparing your performance over different parts of a ride (for example, a long climb or training sprints). 3. Select an option: • Select Lap Only to trigger the lap counter each time you select and each time you pass any of those locations again. • Select Start And Lap to trigger the lap counter at the GPS location where you select and at any location during the ride where you select . • Select Mark And Lap to trigger the lap counter at a specific GPS location marked before the ride and at any location during the ride where you select . Note: During courses, use the By Position option to trigger laps at all of the lap positions saved in the course. Using Auto Lap by Distance You can use Auto Lap to automatically mark a lap at a specific distance. This feature is helpful for comparing your performance over different parts of a ride (for example, every 10 miles or 40 kilometers). 2. Select By Distance. 10 Edge 200 Owner’s Manual 3. Enter a value. [. . . ] AS568-131 Note: Use EPDM (Ethylene Propylene Diene Monomer) replacement bands only. Go to http://buy . garmin. com, or contact your Garmin dealer. *The actual battery life of a fully charged battery depends on how much time you use GPS and the backlight. Exposure to extremely cold temperatures will also reduce battery life. Bike Mount Specifications Physical size (W × H × D) 1. 5 × 1. 5 × 0. 36 in. (37. 8 × 37. 8 × 9. 2 mm) Weight 0. 28 oz. [. . . ]