User manual GARMIN ETREX

[. . . ] eTrex Legend personal navigator ® TM owner's manual and reference guide © Copyright 2005 GARMIN Ltd. or its subsidiaries All Rights Reserved Garmin International, Inc. 1200 East 151st Street Olathe, KS 66062 U. S. A. Telephone: 913/397. 8200 FAX: 913/397. 8282 Garmin (Europe) Ltd. [. . . ] Highlight the on-screen `Map' button at the bottom of the page and press in on the THUMB STICK to display the Route Map Page. Use the THUMB STICK to move the panning arrow to either end of the displayed route until the end waypoint is highlighted. Then press it in to display the map Options Menu and select `Add Turns'. This option appears only when highlighting the end point of a route. Move the panning arrow to a map item or location where you would like to extend the route and press in on the THUMB STICK to display the Information Page for the new waypoint. Press the on-screen `OK' button to return to the map page and then press it again to place the new waypoint. Map Page Route Options Adding a Route Waypoint to an end point on the Route Map Page To add a route waypoint within a route: 1. Follow steps 1 and 2 in the previous instruction. Use the THUMB STICK to move the panning arrow to a route line. When the arrow touches the line, 38 Main Menu the line becomes thin. Press in on the THUMB STICK to display the word `ADD' next to the line. Drag the line to a map item or other location where you want to establish a new waypoint and then press in on the THUMB STICK to place the new waypoint. Press the on-screen `OK' button to save the new waypoint, then press it again after returning to the Route Map. Routes Options To review or remove a route waypoint: 1. Select the Route from the Routes List and press the THUMB STICK in to display the Route Page. Use the THUMB STICK to highlight the desired route and press in to display the Route Page for that route. Use the THUMB STICK to move the map panning arrow to the waypoint you want to review and press in to pop-up the Options Menu. Select `Review' or `Remove' and press in again to either display the Information Page or remove it from the route. Adding a new waypoint within a Route To view the next waypoint in the route: 1. Place the map panning arrow on the waypoint you are currently viewing and press in to display the Options Menu. Select `Next' and press in again to view the next waypoint. Navigation Page with Bearing Pointer Navigating a Route A Route can be navigated using the Map Page or the Navigation Page. The Map Page displays your movement, the route line, and waypoints on the route. The Navigation Page shows compass direction and a bearing pointer. To navigate a route: 1. Select a route from the Routes List and then press in on the THUMB STICK to display the Route Page. Highlight the on-screen `Navigate' button at the Navigating a Route on the Map Page 39 Main Menu Routes Options Navigating a Route (Continued) bottom of the page and then press in on the THUMB STICK to begin navigating the route. [. . . ] 47 Use With GPS Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6, 7 Using Find Menu 48 Goto 34 Main Menu 23 63 Index Map 48 Route 35 Track Log 41, 42 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi, vii Water Immersion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Waypoints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]