User manual GARMIN ETREX CAMO

[. . . ] Attach the battery cover by turning the D-ring 1/4 turn clockwise. Before you can actually use your eTrex for navigation, you must first obtain a fix on your current position. To do this, take your eTrex outside and find a large, open area that has a clear view of the sky. [. . . ] The waypoint is now stored in the eTrex's memory. Once you select a GOTO, the eTrex will guide you to the destination using the Pointer Page. The pointer (arrow) tells you the direction to the destination waypoint. Walk in the direction the arrow is pointing until it points at the Moving Driection Line at the top of the compass ring. If the arrow points to the right, you need to go right. If the arrow points to the left, go left. When the arrow is pointing straight up, you are on the correct track! After you have used the eTrex for a few trips, the map display can become a bit crowded from keeping track of your every move. You can clean up the screen by clearing the track log (the lines left on the Map Page). You might also want to save your current track log before clearing it. To save the current Track Log: 1. From the MENU Page, highlight `TRACKS' and press ENTER. Press the UP or DOWN button to highlight `SAVE, ' then press ENTER. The SAVE BACK THROUGH window appears giving you a time frame for saving a track or `ENTIRE LOG. ' 3. Press the UP or DOWN button to select the desired option. [. . . ] Press the DOWN button to highlight `YES. ' Press ENTER. Press the PAGE button to select any page. Track Log Page Highlight CLEAR or SAVE and press ENTER Step-by-Step Instructions to Get You Started (Turn this page and begin with Step 1) Review Waypoint Page Important Note More Information: Visit the Garmin Web site for current updates and details about eTrex operation and accessories. www. garmin. com © 2004 Garmin Ltd. [. . . ]