User manual GARMIN ETREX VENTURE CX

[. . . ] eTrex Venture Cx and Legend Cx ® ® personal navigator ® owner's manual eTrex Legend Cx eTrex Venture Cx © 2006 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U. S. A. 913/397. 8200 or 800/800. 1020 Fax 913/397. 8282 Garmin (Europe) Ltd. [. . . ] Press the Menu key to open the Options Menu. Select Off Road Transition, and press Enter to open the Off Route Transition Page. Highlight the Route Leg Transition field, and press Enter to view the list of options. Select the method to use (Manual or Distance) when advancing the route to the next point. Select Distance to enter a radius so that when you are within the entered distance, the eTrex leads you to the next point on your route. Select Manual to transition to the next waypoint anytime while navigating a route. To select the off-road transition for a route: 35 BASIC OPERATION > CREATING AND USING ROUTES Using the Route Page Options The Route Page shows all points stored in memory for the route selected on the Routes Page. Press the Menu key to open the Route Page Options Menu. · Remove All--removes all waypoints from the route. · Reverse Route--reverses the order of the route points in the saved route. · Copy Route--makes a copy of the saved route with the same name, followed by a number. · Delete Route--deletes the saved route. · Change Data Fields--select different values for the two data fields at the bottom of the page. · Restore Defaults--restores route settings to the factory default settings. 36 eTrex Venture Cx and Legend Cx Owner's Manual MAIN PAGES > OVERVIEW MAIN PAGES The eTrex has three main pages: Map Page, Compass Page, and the Main Menu. You can cycle through these pages by pressing the Quit key. Additional pages are added using the Page Sequence option on the Main Menu. The Active Route Page appears in the sequence when you are actively navigating. The Satellite Page appears only at Start Up. Each page has an Options Menu, which contains the setup options and functions that apply to the page. To view the Options Menu for a page, press the Menu key. Map Page Compass Page Main Menu No Options Map Page Options Menu eTrex Venture Cx and Legend Cx Owner's Manual Compass Page Options Menu 37 MAIN PAGES > SATELLITE PAGE Satellite Page The Satellite Page shows the receiver status, satellite locations, satellite signal strength, and the receiver's current location when the unit receives signals from at least three satellites. The Satellite Page appears when you turn the unit on and is accessed from the Main Menu thereafter. Location Satellite location Satellite signal strength Using the Satellite Page Options Menu Press the Menu key to open the Options Menu. Satellite Page · Use With GPS Off/On--enables you to turn the GPS receiver on or off. · Track Up/North Up--indicates whether satellites are shown with the rings oriented with North toward the top of the display or your current track toward the top of the screen. · Multicolor/Single Color--indicates whether each satellite displays in a different color or the same color. · New Location--use if you have moved the unit more than 600 miles and you are having trouble locking onto satellite signals. [. . . ] Some states do not allow the exclusion of incidental or consequential damages, so the above limitations may not apply to you. Garmin retains the exclusive right to repair or replace the unit or software or offer a full refund of the purchase price at its sole discretion. SUCH REMEDY SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY. To obtain warranty service, contact your local Garmin authorized dealer or call Garmin Product Support for shipping instructions and an RMA tracking number. [. . . ]