User manual GARMIN ETREX 10

[. . . ] For use with models 10, 20, 30 owner’s manual eTrex® © 2011 Garmin Ltd. Or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. [. . . ] 31 eTrex Owner’s Manual Customizing Your Device • Data Fields—selects the number and size of the data fields to display on the map. €¢ Advanced Map Setup—sets the zoom levels, the text size, and the detail level of the map. —¦â—¦ Auto Zoom—automatically selects the appropriate zoom level for optimal use on your map. When Off is selected, you must zoom in or out manually. —¦â—¦ Zoom Levels—selects the zoom level for map items. —¦â—¦ Text Size—selects the text size for map items. —¦â—¦ Detail—selects the amount of detail shown on the map. Showing more detail may cause the map to redraw more slowly. —¦â—¦ Shaded Relief—shows detail relief on the map (if available) or turns off shading. 32 • Map Information—allows you to enable or disable the maps currently loaded on the device. Auto records the tracks at a variable rate to create an optimum representation of your tracks. • Recording Interval—selects a track log recording rate. Recording points more frequently creates a more-detailed track, but fills the track log faster. eTrex Owner’s Manual Customizing Your Device • Auto Archive—selects an automatic archive method to organize your tracks. Tracks are saved and cleared automatically based on the user setting. €¢ Color (eTrex 20/30)—changes the color of the track line on the map. €¢ Time Zone—allows you to select the time zone for the device. You can select Automatic to set the time zone automatically based on your GPS position. Changing the Units of Measure You can customize units of measure for distance and speed, elevation, and pressure. Select a unit of measure for the setting. Position Format Settings Note: Do not change the position format or the map datum coordinate system unless you are using a map or chart that specifies a different position format. €¢ Position Format—sets the position format in which a given location reading appears. [. . . ] The direction in which you must move to return to the route. Data Field Description Trip Odometer A running tally of the distance traveled since the last reset. Trip Time A running tally of time Moving since the last reset. Trip Time The time spent not Stopped moving since the last reset. [. . . ]