User manual GARMIN FISHFINDER 160 BLUE

[. . . ] Fishfinder 160 Blue owner's manual © 2001 GARMIN Corporation GARMIN International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U. S. A. 913/397. 8200 or 800/800. 1020 Fax 913/397. 8282 GARMIN (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9AQ, U. K. [. . . ] Highlight the `Scale' selection field and press ENTER. Choose `Overlay, ' `Corners, ' `Basic' or `No Scale, ' then press ENTER to accept the selection. Scale -- `Overlay' Scale -- `Corners' Tools Tab The `Tools' tab contains the `Depth Line, ' `Flasher, ' `Simulator' and `Noise Reject' tools. The `Depth Line' tool is used to quickly identify a set depth or to measure the depth of underwater objects. The `Noise Reject' and `Flasher' tools are used to enhance the chart and help in identifying and providing information about an underwater return. The `Simulator' tool is used to enhance the simulator mode by allowing you to customize the simulated transducer selection. To access the `Tools' tab, place the highlight over it using the arrow keys. Depth Line When the `Depth Line' tool is activated, a Depth Line selection is added to the Adjustment Bar. To activate the Depth Line: Scale -- `Basic' Scale -- `No Scale' 1. Highlight the `Tools' tab on the Setup Menu. Highlight the `Depth Line' selection field and press ENTER. Select `On' and press ENTER. 18 To change the Depth Line Setting: 1. Place the highlight over the `Depth Line' selection on the Adjustment Bar. Use the UP or DOWN Arrow to change the setting, press ENTER to accept the change. Unit Operation Setup Menu: Tools Tab Flasher With the `Flasher' tool active, a graphic Flasher representation will be displayed on the far right side of the chart. This graphic Flasher displays structure and bottom returns much the same as a true Flasher. You may find this feature particularly useful when using `Fish Symbols. ' To Turn the Graphic Flasher on and off: 1. Highlight the `Tools' tab on the Setup Menu. Highlight the `Flasher' selection field and press ENTER. Select `On' or `Off' and press ENTER to accept the selection. Simulator The `Simulator' tool allows the unit to simulate the use of four different transducer configurations: `Depth Only', `Temp', `Speed', or `Temp and Speed'. These choices allow the user to view more accurate depictions of actual unit operation. For details on using the simulator, see page 35. Noise Reject Depth Line Activated The `Noise Reject' tool helps filter unwanted noise from the chart. The `Noise Reject' tool can be turned `Off, ' set for `Auto' (automatic) adjustment or set for `Manual' adjustment. Remember when setting the Noise Reject tool, the higher the noise rejection setting, the more likely the unit is to not show fish or structure. Continued on page 20 Graphic Flasher Activated 19 Noise Reject (continued) Unit Operation Setup Menu: Tools/Numbers Tabs To change the Noise Reject Setting: 1. Highlight the `Tools' tab on the Setup Menu. Highlight the `Noise Reject' selection field and press ENTER. [. . . ] 28 Surface Mounting the Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 System Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-26 L Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii M Memory Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Mounting the Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8 Mounting the Speed Sensor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Mounting the Transducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 N NMEA Output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Noise Reject . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Number Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Numbers Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]