User manual GARMIN FORERUNNER 410

[. . . ] owner's manual FORERUNNER® 410 GPS-ENABLED SPORTS WATCH WITH WIRELESS SYNC © 2010 Garmin Ltd. or its subsidiaries All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. [. . . ] When you are following a course in training mode, tap the bezel to view 17 Courses Another way you can use the device for custom training is to follow courses based on a previously Forerunner 410 Owner's Manual Training Mode the navigation page. To end a course manually, press stop > press and hold reset. Beginning a Course You can include a warm up before you begin your course. Press start to begin the course, and then warm up. Stay away from your course path as you warm up. When you are ready to begin your course, head toward your course. When you are on any part of the course path, the device displays an "On Course" message. When you start a course, your Virtual Partner also starts the course. If you are warming up and are not on the course, the first time that you join the course, your Virtual Partner restarts the course from your current location. If you stray away from the course, the device displays an "Off Course" message. Use the navigation page to find your way back to the course. Touch and hold menu > select Training > Courses. Press quit to exit. 18 Forerunner 410 Owner's Manual GPS Mode GPS Mode Touch and hold GPS to view the GPS menu. Satellites--view information about the GPS signals the device is currently receiving. The black bars represent the strength of each satellite signal. The number of the satellite appears below each bar. The GPS accuracy appears at the bottom of the page. noTe: When GPS is off, speed and distance data are not available, unless you are using the foot pod. Save Location--save your current location. Marking a Known Location Using Coordinates 1. Touch and hold GPS > select Save Location. Edit the location name and elevation (optional). Go To Location--select a location from the list, and then select Go. Your device navigates you to the saved location using the navigation page. GPS--turn GPS on or off (for indoor use). Forerunner 410 Owner's Manual 19 GPS Mode Back To Start--navigates you back to your starting point. [. . . ] and its subsidiaries ("Garmin") grant you a limited license to use the software embedded in this device (the "Software") in binary executable form in the normal operation of the product. Title, ownership rights, and Forerunner 410 Owner's Manual 38 Appendix intellectual property rights in and to the Software remain in Garmin and/or its third-party providers. You acknowledge that the Software is the property of Garmin and/or its third-party providers and is protected under the United States of America copyright laws and international copyright treaties. You further acknowledge that the structure, organization, and code of the Software, for which source code is not provided, are valuable trade secrets of Garmin and/ or its third-party providers and that the Software in source code form remains a valuable trade secret of Garmin and/or its third-party providers. [. . . ]