User manual GARMIN G1000 DIAMOND COCKPIT REFERENCE GUIDE DA40 DA40F0369.10ORLATER

[. . . ] G1000 TM Cockpit Reference Guide for the Diamond DA40 Copyright © 2004-2006 Garmin Ltd. This manual reflects the operation of System Software version 0369. 10 or later for the Diamond DA40, DA40F. Some differences in operation may be observed when comparing the information in this manual to earlier or later software versions. Garmin International, Inc. , 1200 East 151st Street, Olathe, Kansas 66062, U. S. A. [. . . ] As the Selected Altitude is captured, Altitude Hold Mode becomes active and the autopilot maintains the Selected Altitude. HD G 30 d Mo e 33 0 3 12 7 4. 24 21 Clovis VORTAC CZQ 27 6 9 12 Figure 6-25 Go Around / Missed Approach Garmin G1000 Cockpit Reference Guide for the DA40 15 18 GP e od SM 3. 2. KFAT GA M od e 1. 6-19 SECTION 6 ­ AUTOMATIC FLIGHT CONTROL Blank Page 6-20 Garmin G1000 Cockpit Reference Guide for the DA40 SECTION 7 ­ NAVIGATION SECTION 7: NAVIGATION The following discussions pertain to the Multi Function Display, unless otherwise indicated. 7. 2 DIRECT-TO NAVIGATION Direct-to Navigation from the MFD Identifier Facility Name City Flight Plan Field Map of the Selected Waypoint Map Range Bearing Distance Direct-to Course Region Latitude/ Longitude Activate Field Figure 7-2 MFD Direct-to Window Symbol Nearest Airport Map Orientation 7. 1 NAVIGATION MAP PAGE Select the MAP Page Group 1) Turn the large FMS Knob until `MAP' is highlighted in the Page Group Box in the lower right of the MFD display. Turn the small FMS Knob to select the first MAP page (indicated by a solid rectangular icon). Press the MAP Softkey to display softkeys for the available information which may be displayed on the map. WARNING: The map display should only be used for situational awareness. Any map display indication should be compared with approved navigation sources. 2) 3) Enter a Direct-to Destination 1) 2) Press the Direct-to ( ) Key. Turn the small FMS Knob to enter the first letter of the destination waypoint identifier. Turn the large FMS Knob to the right to move the cursor to the next character position. Repeat step 2 to spell out the rest of the waypoint identifier. Press the ENT Key to confirm the identifier. The `Activate?' field is highlighted. Press the ENT Key to activate. 3) 4) 5) Select a Direct-to Destination to a Flight Plan Waypoint or Nearest Airport 1) Figure 7-1 Navigation Map Page While navigating an active flight plan, press the Direct-to ( ) Key. Turn the large FMS Knob to highlight the `FPL/ NRST WAYPOINT' field. 7-1 2) Garmin G1000 Cockpit Reference Guide for the DA40 SECTION 7 ­ NAVIGATION 3) 4) Turn the small FMS Knob to display a list of waypoints or airports. Continue turning the small FMS Knob to scroll through the list and highlight the desired waypoint or airport. Press the ENT Key to confirm the selection. Press ENT again to activate a Direct-to. Press the Direct-to ( ) Key, followed by pressing the ENT Key twice. If a missed approach point (MAP) is the current destination, the approach will be canceled. To Manually Define the Direct-to Course 1) Press the Direct-to ( ) Key and enter a waypoint as discussed in previous steps, or to edit the active direct-to. Turn the large FMS Knob to highlight the `COURSE' field. Turn the FMS Knobs to select the desired course and press the ENT Key. Press the ENT Key again to begin navigation using the selected destination and course. 1) 2) 3) 4) 5) Figure 7-3 Canceling Direct-to Navigation 5) Direct-to Navigation from the PFD WPT Symbol Identifier Facility Name Flight Plan WPT Bearing to WPT Distance from WPT Course to Selected WPT To Re-center the CDI to the Destination Waypoint WPT Location Nearest WPT Lat/Lon Figure 7-4 PFD Direct-to Window Press the Direct-to Key ( ). Turn the large FMS Knob to place the cursor in the desired selection field. [. . . ] SLCT FREQ ­ Select appropriate frequency for approach. SLCT NAV ­ Select NAV on CDI for approach. NO WGS84 WPT ­ Non WGS 84 waypoint for navigation -[xxxx] TRAFFIC FAIL ­ Traffic device has failed. STRMSCP FAIL ­ Stormscope has failed. [. . . ]