User manual GARMIN G1000 MOONEY PRIMARYFLIGHTDISPLAY PILOTS GUIDE M20

[. . . ] G1000 TM primary flight display pilot's guide for Mooney M20M & M20R Record of Revisions Revision Date of Revision Revision Page Range A 10/18/04 3-1 ­ 3-49 Description Initial release. Garmin G1000 PFD Pilot's Guide for Mooney M20M & M20R 190-00443-00 Rev. A INTRODUCTION 3. 1 INTRODUCTION This Pilot's Guide describes the major features of the Primary Flight Display (PFD) on the G1000 Integrated Cockpit System installed on the Mooney aircraft. The system consists of two 10. 4 inch color flat panel displays. During normal operation, the left display is configured as a Primary Flight Display. [. . . ] Press the TERRAIN softkey again to remove the terrain data from the map. NOTE: Terrain data is not displayed when the aircraft latitude is greater than 75° North or 60° South. NOTE: Refer to the Appendix for more details about terrain. Garmin G1000 PFD Pilot's Guide for Mooney M20M & M20R 3-29 SUPPLEMENTAL FLIGHT DATA To enable/disable lightning data (optional): 1. Press the LTNG softkey to display WX-500 Stormscope data on the map within a 200 nm radius of the aircraft. A lightning bolt icon appears above the map range on the map. Press the LTNG softkey again to remove lightning data from the map. NOTE: Refer to the Multi Function Display Pilot's Guide for more details about lightning data. 2. To pan the map: NOTE: The joystick on the PFD operates independently from the one on the MFD. 1. 2. 3. Push in the joystick to display the panning pointer. This allows the pilot to move the map beyond its current limits without adjusting the range. Push in and move the joystick to pan the map in the general direction of the desired location. When the pointer is placed on an object, the name of the object is highlighted for approximately 4 seconds (even if the name was not originally displayed on the map). This feature applies to everything displayed on the map except for route lines. Push in the joystick again to cancel the panning function and return to the present position on the map. NOTE: The airspace boundary stays highlighted for approximately 4 seconds before returning to normal shading. 3-30 Garmin G1000 PFD Pilot's Guide for Mooney M20M & M20R 190-00443-00 Rev. A SUPPLEMENTAL FLIGHT DATA WORKING WITH MENUS Much of the G1000 operation is accomplished using a menu interface. The G1000 has a bezel-mounted dedicated MENU key that, when pressed, displays a context-sensitive list of options. This option list allows the pilot to access additional features or make setting changes which specifically relate to the currently displayed window. Some menus provide access to additional sub-menus that are in turn used to view, edit, select and review options. Once the Page Menu window is displayed, turn the FMS knob to scroll through a list of available options (a scroll bar always appears to the right of the window when the option list is longer than the window) and press the ENT key to select the desired option. The CLR key may be pressed to remove the menu and cancel the operation. Pressing the FMS knob also removes the displayed menu. AUXILIARY WINDOW KEYS The main keys which are used in association with the PFD Auxiliary window operations are listed below: · DIRECT-TO ­ Activates the direct-to function, and allows the user to enter a destination waypoint and establishes a direct course to the selected destination (specified by identifier chosen from the active route). · FPL ­ Displays the active Flight Plan Page for creating and editing the active flight plan or accessing stored flight plans. · CLR ­ Erases information, cancels an entry, or removes page menus. · MENU ­ Displays a context-sensitive list of options. This option list allows the user to access additional features or make setting changes which relate to certain pages. · PROC ­ Selects approaches, departures and arrivals for the flight plan. [. . . ] In the event of a display failure, the pilot loses one NAV, one COM and GPS as displayed below: · PFD failure ­ NAV1, COM1 and GPS1 are lost · MFD failure ­ NAV2, COM2 and GPS2 are lost Figure 3. 7. 1 PFD Reversionary Mode 190-00443-00 Rev. A Garmin G1000 PFD Pilot's Guide for Mooney M20M & M20R 3-47 REVERSIONARY MODE This page intentionally left blank. 3-48 Garmin G1000 PFD Pilot's Guide for Mooney M20M & M20R 190-00443-00 Rev. A ALERTS & ANNUNCIATIONS 3. 8 ALERTS AND ANNUNCIATIONS ALERTS WINDOW Alerts appear in the Alerts window in the lower right corner of the PFD. The term "Alerts" is an encompassing term in that it includes advisories, cautions and warnings. [. . . ]