User manual GARMIN G1000 MOONEY PRIMARYFLIGHTDISPLAY PILOTS GUIDE M20M M20R

[. . . ] G1000 TM primary flight display pilot's guide for Mooney M20M & M20R Record of Revisions Revision Date of Revision Revision Page Range A 05/23/05 3-1 ­ 3-51 Description Initial release. Garmin G1000 PFD Pilot's Guide for Mooney M20M & M20R 190-00443-01 Rev. A INTRODUCTION 3. 1 INTRODUCTION This Pilot's Guide describes the major features of the Primary Flight Display (PFD) on the G1000 Integrated Cockpit System installed on the Mooney aircraft. The system consists of two 10. 4 inch color flat panel displays. During normal operation, the left display is configured as a Primary Flight Display. [. . . ] Press the DCLTR softkey to remove background map details until the desired amount of detail is depicted. The declutter level appears above the softkey (i. e. , DCLTR-1). Refer to the Multi Function Display Pilot's Guide for more details. Press the TRAFFIC softkey to display Traffic Information Service (TIS) traffic. Traffic symbology appears next to the aircraft icon and in the bottom right corner of the map. Press the TRAFFIC softkey again to remove data from the map. NOTE: TIS displays traffic within seven nautical miles from 3, 000 ft below to 3, 500 ft above the requesting aircraft, and includes location, direction, altitude, and climb/descent information. NOTE: If a second TA appears or if the TAs displayed decrease and then increase, a new audio is heard and an alert is displayed. NOTE: Refer to the Appendix for more details about Traffic Information Service (TIS). NOTE: Refer to the G1000 Optional Equipment Pilot's Guide for more details about Traffic Advisory System (TAS). To enable/disable topo data: 1. Press the TOPO softkey to display topographic land colors, which represent land elevation. Press the TOPO softkey again to remove topo data from the map. NOTE: When topo data is removed from the display, all cartographic data is automatically removed and the Jeppesen Nav Data is presented on a black background. To enable/disable terrain data: 1. Press the TERRAIN softkey to display color-coded terrain tiles, which are based upon the aircraft current altitude. A mountain icon appears above the zoom range in the lower right corner of the map, showing that terrain is selected. · Red (warning) ­ Land elevation is within 100 ft or above the aircraft current altitude. · Yellow (caution) ­ Land elevation is greater than 100 ft to 1, 000 ft below aircraft altitude. · Black ­ Land elevation greater than 1, 000 ft below aircraft altitude. Press the TERRAIN softkey again to remove the terrain data from the map. NOTE: Terrain data is not displayed when the aircraft latitude is greater than 75° North or 60° South. NOTE: Refer to the Appendix for more details about terrain. 190-00443-01 Rev. A Garmin G1000 PFD Pilot's Guide for Mooney M20M & M20R 3-31 SUPPLEMENTAL FLIGHT DATA To enable/disable Stormscope (optional), NEXRAD (optional), or XM lightning (optional) data: 1. Press the STRMSCP (optional), NEXRAD (optional), or XM LTNG (optional) softkey to display weather information. Press the STRMSCP, NEXRAD, or XM LTNG softkey again to remove the weather information from the map. NOTE: Refer to the G1000 Optional Equipment Pilot's Guide for more details about the weather options. WORKING WITH MENUS Much of the G1000 operation is accomplished using a menu interface. The G1000 has a bezel-mounted dedicated MENU key that, when pressed, displays a context-sensitive list of options. [. . . ] In the event of a display failure, the pilot loses one NAV, one COM and GPS as displayed below: · PFD failure ­ NAV1, COM1 and GPS1 are lost · MFD failure ­ NAV2, COM2 and GPS2 are lost Figure 3. 7. 1 PFD Reversionary Mode 190-00443-01 Rev. A Garmin G1000 PFD Pilot's Guide for Mooney M20M & M20R 3-49 REVERSIONARY MODE This page intentionally left blank. 3-50 Garmin G1000 PFD Pilot's Guide for Mooney M20M & M20R 190-00443-01 Rev. A ALERTS & ANNUNCIATIONS 3. 8 ALERTS AND ANNUNCIATIONS ALERTS WINDOW Alerts appear in the Alerts window in the lower right corner of the PFD. The term "Alerts" is an encompassing term in that it includes advisories, cautions and warnings. [. . . ]